File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 14:45, 1 December 2008 | DSCN0797.JPG (file) |  |
273 KB | Insulated extruder barrel in PTFE clamp on z-axis. | 1 |
| 14:45, 1 December 2008 | DSCN0826.JPG (file) |  |
259 KB | Top shot of initial PTFE clamp arrangement with sandpaper as a friction inhancer. | 1 |
| 14:45, 1 December 2008 | DSCN0827.JPG (file) |  |
259 KB | Drive screw half of extruder body with offset motor mount next to GM3 gearmotor. | 1 |
| 14:45, 1 December 2008 | DSCN0828.JPG (file) |  |
254 KB | 1 | |
| 14:45, 1 December 2008 | DSCN0829.JPG (file) |  |
174 KB | Fiber glass cloth wrapped around heater barrel and PTFE. | 1 |
| 14:45, 1 December 2008 | DSCN0830.JPG (file) |  |
138 KB | 1 | |
| 14:45, 1 December 2008 | DSCN0751.JPG (file) |  |
217 KB | Assembled extruder with offset motor mount on z-axis. | 1 |
| 14:41, 1 December 2008 | Extruder Half-Filament Side.JPG (file) |  |
131 KB | The filament half of the extruder mounted on the ptfe clamp and secured to a desk for testing. | 1 |
| 17:46, 7 October 2008 | Electronics midway.JPG (file) |  |
326 KB | Another view of the electronics midway through mounting. | 1 |
| 17:44, 7 October 2008 | Electronics board incomplete.JPG (file) |  |
400 KB | Mid-way through putting the electronics on their board with the power supply. | 1 |
| 17:33, 7 October 2008 | First printed minimug.JPG (file) |  |
152 KB | First successful printing on Frank. | 1 |
| 17:29, 7 October 2008 | Xy axis and electronics overview.jpg (file) |  |
991 KB | Overview of xy-axis and initial electronics mounting. | 1 |
| 17:26, 7 October 2008 | RepStrap With X-Stage Rails.jpg (file) |  |
85 KB | Frame with x-axis rails mounted. | 1 |
| 17:24, 7 October 2008 | Yaxis platform guide.JPG (file) |  |
151 KB | Y-axis platform and guide clamped for drilling. | 1 |
| 17:20, 7 October 2008 | Rail Spacer Detail.jpg (file) |  |
187 KB | X-axis rails spacer detail. | 1 |
| 17:19, 7 October 2008 | Rail Nut Detail.jpg (file) |  |
249 KB | X-axis attachment point. | 1 |
| 17:11, 7 October 2008 | Other Stuff 028.jpg (file) |  |
831 KB | A side view of the frame and axis. | 1 |
| 17:06, 7 October 2008 | Frame Components.jpg (file) |  |
366 KB | Frame Components. | 1 |
| 12:52, 7 October 2008 | Zaxis slide motor and extruder.JPG (file) |  |
907 KB | Z-axis slide, stepper, and extruder on the vertical. | 1 |
| 12:51, 7 October 2008 | Initial Stepper Test.JPG (file) |  |
918 KB | Testing of the Stepper Driver Board v1.1. | 1 |
| 12:50, 7 October 2008 | Frame And XY Axis.JPG (file) |  |
867 KB | Frame and x/y axis sans electronics and motors. | 1 |
| 12:49, 7 October 2008 | Detail of zaxis slide.JPG (file) |  |
848 KB | Detail of the z-axis slide on its vertical. | 1 |
| 12:49, 7 October 2008 | Detail of yaxis motor mount.JPG (file) |  |
875 KB | Detailed view of the y-axis motor mount. | 1 |
| 12:48, 7 October 2008 | Detail of xaxis motor mount.JPG (file) |  |
970 KB | Detailed view of the x-axis motor mount. | 1 |
| 12:47, 7 October 2008 | Detail back side zaxis slide.JPG (file) |  |
810 KB | Detailed view of the rear/side of the z-axis slide on its vertical. Held on my permanent magnets to the vertical. Salvaged off of a universal stereo plotter. | 1 |
| 12:40, 7 October 2008 | Clean Frank No Extruder.JPG (file) |  |
991 KB | Frank before the electronics are all wired together and before the z-axis and extruder are mounted. | 1 |
| 12:40, 7 October 2008 | Initial Finished Frank.JPG (file) |  |
884 KB | Frank in the initial finished state just before printing his minimug. | 1 |
