File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 20:59, 30 March 2016 | Reprap wiki mixed layer heights example1.png (file) |  |
9 KB | Example 1: Object destined for mixed layer heights | 1 |
| 08:29, 25 June 2015 | Diy supports floating fins kisslicer.png (file) |  |
112 KB | 1 | |
| 08:27, 25 June 2015 | Diy supports floating fins simplify3d.png (file) |  |
513 KB | 1 | |
| 08:25, 25 June 2015 | Diy supports floating fins slic3r.png (file) |  |
261 KB | 1 | |
| 08:24, 25 June 2015 | Diy supports floating fins blender.png (file) |  |
53 KB | Reverted to version as of 12:08, 25 June 2015 | 6 |
| 13:30, 24 June 2015 | Diy supports ex 2 blender.png (file) |  |
114 KB | 2 | |
| 06:22, 24 June 2015 | Diy supports ex 2 acvalve blender.png (file) |  |
116 KB | Replacement part for an air compressor, showing original object and the various supports. | 1 |
| 05:59, 24 June 2015 | Diy supports ex 2 paths doubling.png (file) |  |
87 KB | DIY supports in orange. This single layer view in KISSlicer shows how the thickness of the supports resulted in some I-shaped paths, and some small rectangles. | 1 |
| 05:53, 24 June 2015 | Diy supports ex 2 paths.png (file) |  |
131 KB | DIY supports, mostly in orange, showing the just barely acceptable gappiness of minimizing the support width. Any smaller and the supports resulted in missing layers. | 1 |
| 05:36, 21 June 2015 | Diy supports floating blender 001 radial closeup.png (file) |  |
209 KB | Radial DIY supports in Blender, with a closeup of the bottom support fins and the array modifier used to duplicate one fin to many. | 1 |
| 05:20, 21 June 2015 | Diy supports floating blender 001 radial.png (file) |  |
62 KB | Radial DIY supports in Blender. | 1 |
| 05:01, 21 June 2015 | Diy supports floating blender 001 array.png (file) |  |
105 KB | Some DIY floating supports. Blender array modifier used to duplicate and space 2.2mm apart (center to center). | 1 |
| 04:51, 21 June 2015 | Diy supports floating blender 001.png (file) |  |
55 KB | A couple examples of DIY supports, in blue. The "floating" supports at the top are fins which are spaced from the vertical pink wall by about .21mm. They are roughly .35mm below the horizontal solid object surface above, and about 1.5mm apart from eac... | 1 |
