Welcome! Log In Create A New Profile

Advanced

Replacing Budaschnozzle nozzle

Posted by Ohmarinus 
Replacing Budaschnozzle nozzle
May 23, 2013 04:25PM
Hi guys, I found a video on the web about replacing the Budaschnozzle nozzle, they say it has to be done when the hotend is cold, but the thing that happens to me is that when I unscrew the nozzle with a tool, the whole threaded tube that the nozzle is connected to, comes with it, so it is unscrewing with it.

Should I heat it up and try to unscrew it when it is hot?

I'm afraid to experiment, the threaded tube will unscrew all the way out of the hotend if I want to get the nozzle off. I have carefully screwn it back in to the hotend, and testing if it still prints well, so far so good. But I really want to change my 0.5 nozzle for a 0.4 nozzle because with my old hotend I had much better results with my 0.4mm nozzle.
Sorry, only registered users may post in this forum.

Click here to login