Experiences with Megatronics V2 ?

Any one with experience using this board? I read some where in the forums about issues with the PBC track being too thin...(if only i know how it affects aboard) What will be the best board recomended for an absolute beginner?
I am looking to buy one for my Prusa I3 build.
Thanks!!

Topicawox Wrote:
-------------------------------------------------------
> Any one with experience using this board? I read
> some where in the forums about issues with the PBC
> track being too thin...(if only i know how it
> affects aboard) What will be the best board
> recomended for an absolute beginner?
> I am looking to buy one for my Prusa I3 build.
> Thanks!!

Don't know what you mean about "pcb thin tracks".
I am using it and so fare I stressed it quite a lot....IMHO it's a reliable product.
If you refer to thermal performances under stress.... I am trying to overheat it but so far without any success.

Icing on the cake: can use 8825 drivers (pololu or panucatt) simply moving a jumper.

Best Regards
Davide Ardizzoia

I am thinking of getting MT2 electronics so would also love to hear others views on it

i'm using the board
well it works well without the the lcd
if i connect the lcd ( and activate it ) the estruder 0 doesent work ( the estruder 1 works great )
if i disable the lcd everything works well

the problem appens using the original marlin software or the one downloaded on the reprapworlo website

anyone could help me?

Hello Morgan,
As I am using Repetier FW, I am not the best guy to help you, BUT if you look at your PINS.H (in the megatronics 2 section) you probably have same PIN number for both LCD and extruder 0.

Best Regards
Davide Ardizzoia

---

==============================
no toys here...sorry