DIYTechshop Stuff on Thingyverse

I know acouple people out there have printers from these guys.

I noticed reciently either thier staff or someone added a couple useful parts to thingyverse.

1. Auto leveling bed servo mount and arm for that huge print head ( printed and tried it. works great! )
2, LCD controller mount.. (Printed it , had to use a rotory tool to make the stands a mm or two wider to fit the I3xl's frame but after that works great! )
3. 60mm Fan mount for I3XL , i havent printed or tried this one yet. but its on my short list.

I designed the 60mm mount that's on there, I need to remake for a 40mm fan though. Because on the I3XL you can't fit a 60mm fan back there the way they have it setup, it hits the support rod. That and if you have the LCD it blocks 75% of the flow from the fan, so I need to redesign it.

Edited 1 time(s). Last edit at 04/30/2014 01:04PM by OsiViper.

Use use a couple long wire ties. not perfect but holds the fan in place!

So yea i would love to see a mount that actually "hit perfectly" on the build plate.

What's the link to the auto leveling arm?