Cheap 3D printer September 24, 2016 12:12PM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer September 24, 2016 01:32PM |
Registered: 8 years ago Posts: 318 |
Re: Cheap 3D printer September 24, 2016 03:59PM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer September 24, 2016 07:13PM |
Registered: 8 years ago Posts: 318 |
Re: Cheap 3D printer September 24, 2016 07:38PM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer September 24, 2016 11:56PM |
Registered: 9 years ago Posts: 705 |
Re: Cheap 3D printer September 25, 2016 05:25AM |
Registered: 7 years ago Posts: 13 |
10:09:59.459 : start 10:09:59.459 : echo:Marlin1.0.0 10:09:59.459 : echo: Last Updated: Jan 4 2016 19:03:56 | Author: (John, default config) 10:09:59.459 : Compiled: Jan 4 2016 10:09:59.459 : echo: Free Memory: 3795 PlannerBufferBytes: 1232 10:09:59.459 : echo:Hardcoded Default Settings Loaded 10:09:59.459 : echo: Steps per unit: 10:09:59.459 : echo: M92 X78.74 Y78.74 Z2560.00 E105.00 10:09:59.459 : echo:Maximum feedrates (mm/s): 10:09:59.459 : echo: M203 X400.00 Y400.00 Z2.00 E45.00 10:09:59.459 : echo:Maximum Acceleration (mm/s2): 10:09:59.459 : echo: M201 X1400 Y1400 Z100 E80000 10:09:59.459 : echo:Acceleration: S=acceleration, T=retract acceleration 10:09:59.459 : echo: M204 S1400.00 T5000.00 10:09:59.459 : echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) 10:09:59.459 : echo: M205 S0.00 T0.00 B20000 X13.50 Z0.30 E5.00 10:09:59.459 : echo:Home offset (mm): 10:09:59.459 : echo: M206 X0.00 Y0.00 Z0.00 10:09:59.459 : echo: PID settings: 10:09:59.459 : echo: M301 P19.86 I1.00 D98.93 10:10:02.586 : N1 M110 *2 10:10:02.586 : N1 M110 *2 10:10:02.586 : N2 M115 *4 10:10:02.586 : N3 M111 S6 *68 10:10:02.586 : N4 M111 S6 *67 10:10:02.606 : N5 M80 *62 10:10:02.616 : N6 M80 *61 10:10:02.616 : N7 M105 *0 10:10:02.869 : echo: SD init fail 10:10:02.919 : FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:[firmware.ultimaker.com] PROTOCOL_VERSION:1.0 MACHINE_TYPE:I3 Pro B EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000 10:10:02.929 : N8 M220 S100 *73 10:10:02.929 : N9 M221 S100 *73
Re: Cheap 3D printer September 25, 2016 06:38AM |
Registered: 7 years ago Posts: 13 |
G1 X79.401 Y83.204 E24.53371 G1 X80.400 Y81.954 E24.72376 G1 X80.755 Y81.584 E24.78460 G1 X81.019 Y81.349 E24.82659 G1 X81.266 Y81.188 E24.86160 G1 X81.766 Y80.945 E24.92768
10:43:04.779 : echo:enqueing "M23 yoda~1.gco" 10:43:04.789 : echo:enqueing "M24" 10:43:04.789 : echo:Now fresh file: yoda~1.gco 10:43:04.789 : File opened: yoda~1.gco Size: 13449303 10:43:04.789 : File selected 10:43:07.011 : N659 M105 *13 10:43:10.080 : N660 M105 *7 10:43:13.125 : N661 M105 *6 10:43:16.191 : N662 M105 *5 10:43:19.255 : N663 M105 *4 10:43:22.319 : N664 M105 *3 10:43:25.371 : N665 M105 *2 10:43:28.423 : N666 M105 *1 10:43:31.469 : N667 M105 *0 10:44:58.783 : N668 M105 *15 10:45:00.155 : N669 M105 *14 10:45:03.210 : N670 M105 *6 10:45:06.270 : N671 M105 *7 10:45:09.323 : N672 M105 *4 10:45:12.382 : N673 M105 *5 10:45:15.443 : N674 M105 *2 10:45:18.496 : N675 M105 *3 10:47:01.746 : N676 M105 *0 10:47:02.447 : N677 M105 *1 10:47:05.504 : N678 M105 *14 10:47:08.569 : N679 M105 *15 10:47:11.621 : N680 M105 *9 10:47:14.680 : N681 M105 *8 10:47:17.751 : N682 M105 *11 10:47:20.793 : N683 M105 *10 10:47:23.861 : N684 M105 *13 10:47:26.914 : N685 M105 *12 10:47:29.967 : N686 M105 *15 10:47:33.023 : N687 M105 *14 10:47:36.082 : N688 M105 *1 10:47:39.136 : N689 M105 *0 10:47:42.195 : N690 M105 *8 10:47:45.265 : N691 M105 *9 10:47:48.312 : N692 M105 *10 10:47:51.368 : N693 M105 *11 10:47:54.441 : N694 M105 *12 10:47:57.489 : N695 M105 *13 10:48:00.546 : N696 M105 *14 10:48:03.598 : N697 M105 *15 10:48:06.659 : N698 M105 *0 10:48:09.719 : N699 M105 *1 10:48:12.777 : N700 M105 *0 10:48:15.831 : N701 M105 *1 10:48:18.889 : N702 M105 *2 10:48:21.942 : N703 M105 *3 10:48:25.000 : N704 M105 *4 10:48:27.620 : echo:Unknown command: "84 E24.78460" 10:48:28.060 : N705 M105 *5 10:48:31.119 : N706 M105 *6 10:48:34.180 : N707 M105 *7 10:48:37.230 : N708 M105 *8 10:48:40.290 : N709 M105 *9 10:48:43.350 : N710 M105 *1 10:48:46.405 : N711 M105 *0 10:48:49.460 : N712 M105 *3 10:48:52.521 : N713 M105 *2 10:48:55.583 : N714 M105 *5 10:48:56.113 : echo:Unknown command: "???????????????????????????????????????????????????????????????????????????????????????????????" 10:48:56.113 : echo:Unknown command: "???????????????????????????????????????????????????????????????????????????????????????????????" 10:48:56.113 : echo:Unknown command: "???????????????????????????????????????????????????????????????????????????????????????????????" 10:48:56.113 : echo:Unknown command: "???????????????????????6.646 E51.69563" 10:48:58.634 : N715 M105 *4 10:49:01.707 : N716 M105 *7 10:49:04.767 : N717 M105 *6 10:49:07.821 : N718 M105 *9 10:49:10.884 : N719 M105 *8 10:49:13.927 : N720 M105 *2 10:49:16.996 : N721 M105 *3 10:49:20.049 : N722 M105 *0 10:49:23.102 : N723 M105 *1 10:49:26.158 : N724 M105 *6 10:49:29.210 : N725 M105 *7 10:49:32.273 : N726 M105 *4 10:49:35.326 : N727 M105 *5 10:49:38.407 : N728 M105 *10 10:49:38.790 : echo:Unknown command: " Y111.164 E65.17906" 10:49:41.447 : N729 M105 *11 10:49:44.060 : echo:enqueing "M84 X Y Z E" 10:49:44.500 : N730 M105 *3 10:49:47.556 : N731 M105 *2 10:49:50.628 : N732 M105 *1 10:49:53.674 : N733 M105 *0 10:49:56.729 : N734 M105 *7 10:49:59.792 : N735 M105 *6 10:50:02.848 : N736 M105 *5 10:50:05.906 : N737 M105 *4 10:50:08.966 : N738 M105 *11 10:50:12.018 : N739 M105 *10 10:50:15.076 : N740 M105 *4 10:50:18.147 : N741 M105 *5 10:50:21.196 : N742 M105 *6 10:50:24.253 : N743 M105 *7 10:50:27.306 : N744 M105 *0 10:50:30.367 : N745 M105 *1 10:50:33.426 : N746 M105 *2 10:50:36.478 : N747 M105 *3 10:50:39.536 : N748 M105 *12
Re: Cheap 3D printer September 25, 2016 07:26AM |
Admin Registered: 13 years ago Posts: 7,008 |
Re: Cheap 3D printer September 25, 2016 11:19AM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer September 25, 2016 03:58PM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer September 25, 2016 05:32PM |
Registered: 8 years ago Posts: 1,671 |
Re: Cheap 3D printer September 25, 2016 06:44PM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer September 27, 2016 03:54PM |
Registered: 9 years ago Posts: 4 |
Re: Cheap 3D printer September 27, 2016 06:36PM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer September 30, 2016 07:00PM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer October 03, 2016 07:30AM |
Registered: 8 years ago Posts: 413 |
Re: Cheap 3D printer October 03, 2016 05:06PM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer October 25, 2016 03:31AM |
Registered: 7 years ago Posts: 13 |
Re: Cheap 3D printer October 25, 2016 10:58AM |
Registered: 7 years ago Posts: 321 |
Quote
plastic_splodge
Still got random offset issues. I tried printing the fan duct for the third time. The first one is a bit small, the second one had a blockage part way though and missed a few layers and then this one had the random feed issue.
Part way though the bed moved to full forward (away from the stop switch) and back again once it detected issues with the steppers jumping. This left it offset so the rest of the print was out of line.
Bad thing is this time I didn't have the lamp on so it looks like that isn't causing the issue
I managed to cut off the right hand part and glue it back on so it is usable but not ideally what I was looking for.
Any other ideas what could cause this, it isn't always in the same direction. When it goes x or y to the stops it handles it as it doesn't end up offset. Occasionally it seems to pause in place as well. The Z axis hasn't randomly moved yet.
Re: Cheap 3D printer October 25, 2016 06:43PM |
Registered: 7 years ago Posts: 13 |