Installing a bootloader on a BIGTREETECH SKR v1.3 November 29, 2019 01:51AM |
Admin Registered: 13 years ago Posts: 7,005 |
FTDI GND -> AUX-1 pin 4 GND FTDI RX -> AUX-1 pin 6 TX FTDI TX -> AUX-1 pin 8 RXIf your confused about which pins are what, they are labeled on the bottom of the PCB.
lpc21isp version 1.97 File DFU-Bootloader.hex: loaded... Start Address = 0x000000CD converted to binary format... image size : 13944 Image size : 13944 Synchronizing (ESC to abort). OK Read bootcode version: 2 4 Read part ID: LPC1768, 512 kiB FLASH / 64 kiB SRAM (0x26013F37) Will start programming at Sector 1 if possible, and conclude with Sector 0 to ensure that checksum is written last. Wiping Device. OK Sector 1: .............................................................................................. Sector 2: .............................................................................................. Sector 3: .......................................... Sector 0: .............................................................................................. Download Finished... taking 7 seconds Now launching the brand new code
Re: Installing a bootloader on a BIGTREETECH SKR v1.3 November 29, 2019 12:32PM |
Registered: 6 years ago Posts: 33 |
Re: Installing a bootloader on a BIGTREETECH SKR v1.3 April 12, 2020 07:58AM |
Admin Registered: 13 years ago Posts: 7,005 |
Re: Installing a bootloader on a BIGTREETECH SKR v1.3 May 11, 2020 10:37AM |
Registered: 3 years ago Posts: 1 |
Re: Installing a bootloader on a BIGTREETECH SKR v1.3 May 11, 2020 10:55PM |
Admin Registered: 13 years ago Posts: 7,005 |
Re: Installing a bootloader on a BIGTREETECH SKR v1.3 June 11, 2020 10:21AM |
Registered: 9 years ago Posts: 4 |
Re: Installing a bootloader on a BIGTREETECH SKR v1.3 January 20, 2021 03:10PM |
Registered: 3 years ago Posts: 3 |