Hi all,
Have for some years a HE3D printer with a MKS base V1.5 board, 1 extruder. Still can connect with Arduino ide with the board but the board does not work anymore. Using Repertier-host, this will connect but not print anymore. Think some program did change the original software :-(.
Can someone help me with this software problem ?? I can use a HEX file of INO for arduino/AVR.

Did try to install the Arduino blink file and this works oke, so i can enter the controler but do not have the correct program for it.
Hope someone has the official file for it.

Regards
Kees Kamhoot
the Netherlands

BOARD_MKS_BASE_15 is a standard motherboard in Marlin


You Download Marlin
Set #define MOTHERBOARD BOARD_MKS_BASE_15

compile and upload

This should talk over serial.

then you need to customize marlin for your printer to do anything useful


It would help if you listed the printer type. A quick google shows several different HE3D printers

Edited 1 time(s). Last edit at 11/28/2023 09:05AM by Dust.