STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2

gloomyandy

STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
January 08, 2021 07:03AM

Registered: 5 years ago
Posts: 213

Version 3.2_1 for STM32F4/LPC1768/1769 based boards is now available. Please see:[github.com]

Reply Quote

Molafa

Re: STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
January 10, 2021 07:20PM

Registered: 4 years ago
Posts: 9

Hi,

I updated to RRF 3.2 & ever since I'm having an issue with Duet Web Control. I'm running on SKR 1.4T.
I have ESP Wifi Module, flashed with latest 1.25 firmware.
I'm also running Duet Web Control 3.2.

When I'm trying to load the page, it's stuck at "Connecting" although everything in the background seems to be updated. please check the screenshot.

Reply Quote

Attachments:
open | download - RRF 3.2.png (338.6 KB)

dc42

Re: STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
January 11, 2021 02:58AM

Registered: 11 years ago
Posts: 14,685

I suggest you connect to the board via USB and send M552 to see whether the WiFi module has connected to the access point.

Large delta printer [miscsolutions.wordpress.com], E3D tool changer, Robotdigg SCARA printer, Crane Quad and Ormerod

Disclosure: I design Duet electronics and work on RepRapFirmware, [duet3d.com].

Reply Quote

Molafa

Re: STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
January 11, 2021 10:28AM

Registered: 4 years ago
Posts: 9

Thanks for the suggestion, but yes it was connected, I can see it on my Router, ping it's IP & even when I try your suggestion, it shows that it's connected to WiFi & provide the same IP address.

Reply Quote

Molafa

Re: STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
January 11, 2021 10:38AM

Registered: 4 years ago
Posts: 9

It looks like a browser issue, when I tried a Private Window (Safari on Mac OS) it works fine! it just won't connect under the normal window.
the "Connecting..." never seem to have the loading bar spinning or filling like normal, it's just stuck there.
Any suggestions?

RRF 3.2-1 on SKR1.4T
ESP-12E Wifi Module (FW ver 1.25-01L-D)
TFT35 V3.0
Duet Web Control 3.2.0

Reply Quote

dc42

Re: STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
January 12, 2021 02:40AM

Registered: 11 years ago
Posts: 14,685

We've seen a few issues when using Safari. You could use whatever developer or debug features Safari provides to get a trace of what is going on, perhaps also a Wireshark trace, and post those on the Duet3D forum.

Large delta printer [miscsolutions.wordpress.com], E3D tool changer, Robotdigg SCARA printer, Crane Quad and Ormerod

Disclosure: I design Duet electronics and work on RepRapFirmware, [duet3d.com].

Reply Quote

Ohmarinus

Re: STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
February 02, 2021 08:16AM

Admin
Registered: 11 years ago
Posts: 3,096

Hi all, I'm trying to work out the coupling to a SBM, Raspberry Pi, but I'm running into an issue. I cannot see clearly what goes where when looking at this image:

skr_1.3_sbc.jpg

Is there a higher resolution image available of this? I Googled all over, but it was impossible to find.

Update:
Meanwhile I figured it out, have some nice cables running now, I don't know if it's my laptop's screen, but I found it hard to see the image clearly.

Edited 2 time(s). Last edit at 02/02/2021 04:41PM by Ohmarinus.

http://www.marinusdebeer.nl/

Reply Quote

karabas

Re: STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
August 04, 2021 05:51AM

Registered: 13 years ago
Posts: 227

I wonder what protocol do you use for SKR - SBC connection? I suppose it's not serial

Reply Quote

jay_s

Re: STM32F4/LPC1768/1769 Port of RepRap Firmware V3.2
August 09, 2021 06:54AM

Registered: 13 years ago
Posts: 224

@karabas SPI

Edited 1 time(s). Last edit at 08/09/2021 06:55AM by jay_s.

Based in Darlington, North East

Reply Quote