Mendel justmoves once

hi everyone,

i made a lot of progrcess after my last post, but it still won't work...
i' m now running host software 1.0 because 1.3 did nothing but chrashing.
Now i can move whit the controls in the xyz tab, but after each move i have to restart the whole program for the next move.
When i look at the console i can see that the second time i try to send a move command, it is sent and it is acknowlegded but nothing moves

after restarting the host software all moves work one time again.

Anyone can help me to solve this interesting " non-moving"

Joran

... maybe it hangs while it's waiting on a temperature feedback?

Check all debug options, so you can see all G-Codes sent ...

---

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]

You might want to give repsnapper a try - the original host software was nothing but trouble for me.

What Firmware are you using? I'm using Teacup and have a similar issue using the standard host SW. Try using something REAL simple like send.py
This may also be a topic more for the Host Software or the Firmware sub-forums....

ST