Home
>
Developers
>
Topic
DRC Passed!
Posted by ZachHoeken
|
DRC Passed! March 17, 2007 04:17PM |
Admin Registered: 17 years ago Posts: 1,487 |
Woot!
I uploaded our designs through the batchpcb website to test if it
would work... there were a couple hiccups, but both passed with flying
colors!!
Here are the final sizes:
PowerComms: 6^2 inches = $12 / ea prototype
Universal Controller: 10.45^2 inches = $27.50 / ea prototype
Both designs are in my svn folder under 'production.brd'
~Zach
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
I uploaded our designs through the batchpcb website to test if it
would work... there were a couple hiccups, but both passed with flying
colors!!
Here are the final sizes:
PowerComms: 6^2 inches = $12 / ea prototype
Universal Controller: 10.45^2 inches = $27.50 / ea prototype
Both designs are in my svn folder under 'production.brd'
~Zach
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
|
Re: DRC Passed! March 17, 2007 05:02PM |
Admin Registered: 17 years ago Posts: 178 |
Excellent - do they do a quantity discount?
Best wishes
Adrian
Dr Adrian Bowyer
[staff.bath.ac.uk]
[reprap.org]
Quoting Zach Hoeken :
> Woot!
>
> I uploaded our designs through the batchpcb website to test if it
> would work... there were a couple hiccups, but both passed with flying
> colors!!
>
> Here are the final sizes:
>
> PowerComms: 6^2 inches = $12 / ea prototype
> Universal Controller: 10.45^2 inches = $27.50 / ea prototype
>
> Both designs are in my svn folder under 'production.brd'
>
> ~Zach
> _______________________________________________
> Developers mailing list
> Developers@reprap.org
> [reprap.org]
>
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
Best wishes
Adrian
Dr Adrian Bowyer
[staff.bath.ac.uk]
[reprap.org]
Quoting Zach Hoeken :
> Woot!
>
> I uploaded our designs through the batchpcb website to test if it
> would work... there were a couple hiccups, but both passed with flying
> colors!!
>
> Here are the final sizes:
>
> PowerComms: 6^2 inches = $12 / ea prototype
> Universal Controller: 10.45^2 inches = $27.50 / ea prototype
>
> Both designs are in my svn folder under 'production.brd'
>
> ~Zach
> _______________________________________________
> Developers mailing list
> Developers@reprap.org
> [reprap.org]
>
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
|
Re: DRC Passed! March 17, 2007 06:16PM |
Admin Registered: 17 years ago Posts: 1,487 |
they give a great rate at a >$2,500 purchase. $0.12 / sq in.
we have 54 sq in. of boards, so it would be $6.48 / for all boards.
to meet their minimums, we'd have to buy 385.80 boards. i dont know
if we need that volume just yet, but i could imagine that mendel might
be a different story. =)
~Zach
On 3/17/07, Adrian Bowyer wrote:
> Excellent - do they do a quantity discount?
>
> Best wishes
>
> Adrian
>
> Dr Adrian Bowyer
> [staff.bath.ac.uk]
> [reprap.org]
>
> Quoting Zach Hoeken :
>
> > Woot!
> >
> > I uploaded our designs through the batchpcb website to test if it
> > would work... there were a couple hiccups, but both passed with flying
> > colors!!
> >
> > Here are the final sizes:
> >
> > PowerComms: 6^2 inches = $12 / ea prototype
> > Universal Controller: 10.45^2 inches = $27.50 / ea prototype
> >
> > Both designs are in my svn folder under 'production.brd'
> >
> > ~Zach
> > _______________________________________________
> > Developers mailing list
> > Developers@reprap.org
> > [reprap.org]
> >
>
>
>
> _______________________________________________
> Developers mailing list
> Developers@reprap.org
> [reprap.org]
>
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
we have 54 sq in. of boards, so it would be $6.48 / for all boards.
to meet their minimums, we'd have to buy 385.80 boards. i dont know
if we need that volume just yet, but i could imagine that mendel might
be a different story. =)
~Zach
On 3/17/07, Adrian Bowyer wrote:
> Excellent - do they do a quantity discount?
>
> Best wishes
>
> Adrian
>
> Dr Adrian Bowyer
> [staff.bath.ac.uk]
> [reprap.org]
>
> Quoting Zach Hoeken :
>
> > Woot!
> >
> > I uploaded our designs through the batchpcb website to test if it
> > would work... there were a couple hiccups, but both passed with flying
> > colors!!
> >
> > Here are the final sizes:
> >
> > PowerComms: 6^2 inches = $12 / ea prototype
> > Universal Controller: 10.45^2 inches = $27.50 / ea prototype
> >
> > Both designs are in my svn folder under 'production.brd'
> >
> > ~Zach
> > _______________________________________________
> > Developers mailing list
> > Developers@reprap.org
> > [reprap.org]
> >
>
>
>
> _______________________________________________
> Developers mailing list
> Developers@reprap.org
> [reprap.org]
>
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
|
Re: DRC Passed! March 17, 2007 07:15PM |
Admin Registered: 17 years ago Posts: 1,915 |
Hopefully, Darwin or Mendel or whatever will be printing its own boards by that time.
----- Original Message ----
From: Zach Hoeken
To: Adrian Bowyer
Cc: developers@reprap.org
Sent: Saturday, March 17, 2007 3:16:48 PM
Subject: Re: DRC Passed!
they give a great rate at a >$2,500 purchase. $0.12 / sq in.
we have 54 sq in. of boards, so it would be $6.48 / for all boards.
to meet their minimums, we'd have to buy 385.80 boards. i dont know
if we need that volume just yet, but i could imagine that mendel might
be a different story. =)
~Zach
On 3/17/07, Adrian Bowyer wrote:
> Excellent - do they do a quantity discount?
>
> Best wishes
>
> Adrian
>
> Dr Adrian Bowyer
> [staff.bath.ac.uk]
> [reprap.org]
>
> Quoting Zach Hoeken :
>
> > Woot!
> >
> > I uploaded our designs through the batchpcb website to test if it
> > would work... there were a couple hiccups, but both passed with flying
> > colors!!
> >
> > Here are the final sizes:
> >
> > PowerComms: 6^2 inches = $12 / ea prototype
> > Universal Controller: 10.45^2 inches = $27.50 / ea prototype
> >
> > Both designs are in my svn folder under 'production.brd'
> >
> > ~Zach
> > _______________________________________________
> > Developers mailing list
> > Developers@reprap.org
> > [reprap.org]
> >
>
>
>
> _______________________________________________
> Developers mailing list
> Developers@reprap.org
> [reprap.org]
>
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
____________________________________________________________________________________
Expecting? Get great news right away with email Auto-Check.
Try the Yahoo! Mail Beta.
[advision.webevents.yahoo.com]
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
----- Original Message ----
From: Zach Hoeken
To: Adrian Bowyer
Cc: developers@reprap.org
Sent: Saturday, March 17, 2007 3:16:48 PM
Subject: Re: DRC Passed!
they give a great rate at a >$2,500 purchase. $0.12 / sq in.
we have 54 sq in. of boards, so it would be $6.48 / for all boards.
to meet their minimums, we'd have to buy 385.80 boards. i dont know
if we need that volume just yet, but i could imagine that mendel might
be a different story. =)
~Zach
On 3/17/07, Adrian Bowyer wrote:
> Excellent - do they do a quantity discount?
>
> Best wishes
>
> Adrian
>
> Dr Adrian Bowyer
> [staff.bath.ac.uk]
> [reprap.org]
>
> Quoting Zach Hoeken :
>
> > Woot!
> >
> > I uploaded our designs through the batchpcb website to test if it
> > would work... there were a couple hiccups, but both passed with flying
> > colors!!
> >
> > Here are the final sizes:
> >
> > PowerComms: 6^2 inches = $12 / ea prototype
> > Universal Controller: 10.45^2 inches = $27.50 / ea prototype
> >
> > Both designs are in my svn folder under 'production.brd'
> >
> > ~Zach
> > _______________________________________________
> > Developers mailing list
> > Developers@reprap.org
> > [reprap.org]
> >
>
>
>
> _______________________________________________
> Developers mailing list
> Developers@reprap.org
> [reprap.org]
>
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
____________________________________________________________________________________
Expecting? Get great news right away with email Auto-Check.
Try the Yahoo! Mail Beta.
[advision.webevents.yahoo.com]
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
|
Re: DRC Passed! March 18, 2007 10:06AM |
Admin Registered: 17 years ago Posts: 178 |
Zach - I've messed about with your design a bit - here it is. I've
made all the power connections fat, squared up a few tracks, and put
the mounting holes on a metric grid (makes attaching to the rest of the
machine a bit simpler).
I'll try and make one this afternoon, but first have to fix the
plumbing (pipe furred up)...
Best wishes
Adrian
Dr Adrian Bowyer
[staff.bath.ac.uk]
[reprap.org]
> Quoting Zach Hoeken :
>
>> Woot!
>>
>> I uploaded our designs through the batchpcb website to test if it
>> would work... there were a couple hiccups, but both passed with flying
>> colors!!
>>
>> Here are the final sizes:
>>
>> PowerComms: 6^2 inches = $12 / ea prototype
>> Universal Controller: 10.45^2 inches = $27.50 / ea prototype
>>
>> Both designs are in my svn folder under 'production.brd'
>>
>> ~Zach
>> _______________________________________________
>> Developers mailing list
>> Developers@reprap.org
>> [reprap.org]
>>
>
>
>
>
made all the power connections fat, squared up a few tracks, and put
the mounting holes on a metric grid (makes attaching to the rest of the
machine a bit simpler).
I'll try and make one this afternoon, but first have to fix the
plumbing (pipe furred up)...
Best wishes
Adrian
Dr Adrian Bowyer
[staff.bath.ac.uk]
[reprap.org]
> Quoting Zach Hoeken :
>
>> Woot!
>>
>> I uploaded our designs through the batchpcb website to test if it
>> would work... there were a couple hiccups, but both passed with flying
>> colors!!
>>
>> Here are the final sizes:
>>
>> PowerComms: 6^2 inches = $12 / ea prototype
>> Universal Controller: 10.45^2 inches = $27.50 / ea prototype
>>
>> Both designs are in my svn folder under 'production.brd'
>>
>> ~Zach
>> _______________________________________________
>> Developers mailing list
>> Developers@reprap.org
>> [reprap.org]
>>
>
>
>
>
|
Re: DRC Passed! March 18, 2007 11:05AM |
Admin Registered: 17 years ago Posts: 1,487 |
great, looks good. would you mind checking it into the svn repository
where my prototype designs live?
On 3/18/07, Adrian Bowyer wrote:
> Zach - I've messed about with your design a bit - here it is. I've
> made all the power connections fat, squared up a few tracks, and put
> the mounting holes on a metric grid (makes attaching to the rest of the
> machine a bit simpler).
>
> I'll try and make one this afternoon, but first have to fix the
> plumbing (pipe furred up)...
>
> Best wishes
>
> Adrian
>
> Dr Adrian Bowyer
> [staff.bath.ac.uk]
> [reprap.org]
>
> > Quoting Zach Hoeken :
> >
> >> Woot!
> >>
> >> I uploaded our designs through the batchpcb website to test if it
> >> would work... there were a couple hiccups, but both passed with flying
> >> colors!!
> >>
> >> Here are the final sizes:
> >>
> >> PowerComms: 6^2 inches = $12 / ea prototype
> >> Universal Controller: 10.45^2 inches = $27.50 / ea prototype
> >>
> >> Both designs are in my svn folder under 'production.brd'
> >>
> >> ~Zach
> >> _______________________________________________
> >> Developers mailing list
> >> Developers@reprap.org
> >> [reprap.org]
> >>
> >
> >
> >
> >
>
>
>
> _______________________________________________
> Developers mailing list
> Developers@reprap.org
> [reprap.org]
>
>
>
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
where my prototype designs live?
On 3/18/07, Adrian Bowyer wrote:
> Zach - I've messed about with your design a bit - here it is. I've
> made all the power connections fat, squared up a few tracks, and put
> the mounting holes on a metric grid (makes attaching to the rest of the
> machine a bit simpler).
>
> I'll try and make one this afternoon, but first have to fix the
> plumbing (pipe furred up)...
>
> Best wishes
>
> Adrian
>
> Dr Adrian Bowyer
> [staff.bath.ac.uk]
> [reprap.org]
>
> > Quoting Zach Hoeken :
> >
> >> Woot!
> >>
> >> I uploaded our designs through the batchpcb website to test if it
> >> would work... there were a couple hiccups, but both passed with flying
> >> colors!!
> >>
> >> Here are the final sizes:
> >>
> >> PowerComms: 6^2 inches = $12 / ea prototype
> >> Universal Controller: 10.45^2 inches = $27.50 / ea prototype
> >>
> >> Both designs are in my svn folder under 'production.brd'
> >>
> >> ~Zach
> >> _______________________________________________
> >> Developers mailing list
> >> Developers@reprap.org
> >> [reprap.org]
> >>
> >
> >
> >
> >
>
>
>
> _______________________________________________
> Developers mailing list
> Developers@reprap.org
> [reprap.org]
>
>
>
_______________________________________________
Developers mailing list
Developers@reprap.org
[reprap.org]
Sorry, only registered users may post in this forum.