Hello there!
as i post here i have problem losing steps in my x and y axis randomly .. i notice that happens when my printer prints tight corners or small cycles .. the motors wobbling and tremble

This is my setting .. i thing i have wrong values but i don't know where ... any suggestions it would be appreciated


#define DEFAULT_AXIS_STEPS_PER_UNIT {5.03,5.03,250,43.09}
#define DEFAULT_MAX_FEEDRATE {300, 300, 2, 25}
#define DEFAULT_MAX_ACCELERATION {2000,2000,100,10000}

#define DEFAULT_ACCELERATION 2500
#define DEFAULT_RETRACT_ACCELERATION 3500

The video shows exactly the problem ..

Edited 3 time(s). Last edit at 02/23/2014 03:44AM by pelo13.

Your Y axis belt isn't tight enough, or your pulley is loose would be my diagnossis from what little I can see of the machine in the video.