Print won't start - Possibly hotend issue September 24, 2014 12:22AM |
Registered: 9 years ago Posts: 6 |
; generated by Slic3r 1.1.7 on 2014-09-24 at 11:59:03 ; perimeters extrusion width = 0.40mm ; infill extrusion width = 0.42mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm G21 ; set units to millimeters M190 S109 ; wait for bed temperature to be reached G28 ; home all axes M109 S230 ; heat up hot end to set temperature M82 ; use absolute distances for extrusion G90 ; use absolute coordinates G92 E0 ; set E value to 0 at current position G90 ; use absolute coordinates G92 E0 M82 ; use absolute distances for extrusion