Welcome! Log In Create A New Profile

First Layer Rippling problem

Posted by CyBer

CyBer

First Layer Rippling problem
June 01, 2015 11:19PM

Registered: 8 years ago
Posts: 18

Hey guys, I am having trouble with this issue. I figured that it's a print bed adjustment problem, but I was wondering if you guys know if it's too low or high and if anyone has experience that would help with this issue.

Thanks for your time!

Reply Quote

Attachments:
open | download - php06VQloPM.jpg (40.7 KB)

cat.farmer

Re: First Layer Rippling problem
June 01, 2015 11:22PM

Registered: 10 years ago
Posts: 466

The picture is not so clear, but it looks like your bed or x axis or both is not level.

Reply Quote

CyBer

Re: First Layer Rippling problem
June 02, 2015 01:17AM

Registered: 8 years ago
Posts: 18

Yeah, sorry file size limits sorry.

Reply Quote

Floyd

Re: First Layer Rippling problem
June 02, 2015 08:27AM

Registered: 10 years ago
Posts: 770

Too low.

Reply Quote

dc42

Re: First Layer Rippling problem
June 02, 2015 08:40AM

Registered: 10 years ago
Posts: 14,672

Quote
CyBer
Yeah, sorry file size limits sorry.

Get a Dropbox account if you don't already have one, upload a hi-res photo in your Public dropbox folder, and link to it using the image button in the toolbar.

Edited 1 time(s). Last edit at 06/02/2015 08:40AM by dc42.

Large delta printer [miscsolutions.wordpress.com], E3D tool changer, Robotdigg SCARA printer, Crane Quad and Ormerod

Disclosure: I design Duet electronics and work on RepRapFirmware, [duet3d.com].

Reply Quote

CyBer

Re: First Layer Rippling problem
June 02, 2015 04:08PM

Registered: 8 years ago
Posts: 18

Thanks for the help guys. I will do that from now on. I noticed that the acrylic y axis base was pretty crooked so now I am gluing spacers on the bottom of it so it will slide on the metal slide bars for the y axis and hopefully that will help my problem as whenever I try to calibrate it the variances are really high between the corners.