[solved in 0.7.0] Work around for Slic3r skipping layers.

Sublime

[solved in 0.7.0] Work around for Slic3r skipping layers.
February 18, 2012 04:18AM

Registered: 14 years ago
Posts: 2,947

This is no longer needed as of 0.7.0

As I have mentioned [forums.reprap.org] an others have mentioned [forums.reprap.org] Slic3r has a bug that makes it skip layers for no apparent reason on good clean models.

The simple solution seems to be rotating the model on z by an arbitrary amount, re-save and then re-slice. I have found with some models you may need to try a few times but it seems to work.

Edited 1 time(s). Last edit at 02/27/2012 01:34AM by Sublime.

FFF Settings Calculator	Gcode post processors	Geometric Object Deposition Tool Blog
Tantillus.org	Mini Printable Lathe	How NOT to install a Pololu driver

Reply Quote

DeuxVis

Re: Work around for Slic3r skipping layers.
February 21, 2012 10:49AM

Admin
Registered: 14 years ago
Posts: 2,569

Thanks for the tip.

What software did you successfully use to achieve that rotate trick ? Tried any that didn't work ?

Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.

Reply Quote

Sublime

Re: Work around for Slic3r skipping layers.
February 21, 2012 03:53PM

Registered: 14 years ago
Posts: 2,947

I usually use RepG to orient my parts (click rotate on z and just move it randomly). Some times I open Blender to do it too. Both have worked. I have found using the rotate in Slic3r has some effect too, not always helpful thou.

FFF Settings Calculator	Gcode post processors	Geometric Object Deposition Tool Blog
Tantillus.org	Mini Printable Lathe	How NOT to install a Pololu driver

Reply Quote

Sound

Re: Work around for Slic3r skipping layers.
February 22, 2012 05:30AM

Registered: 14 years ago
Posts: 228

Next release (don't ask me when, but soon), will make this thread very outdated ;-)

Reply Quote

Sublime

Re: Work around for Slic3r skipping layers.
February 22, 2012 02:06PM

Registered: 14 years ago
Posts: 2,947

~~This applies to 0.6.1-dev still~~

Edited 1 time(s). Last edit at 02/27/2012 01:35AM by Sublime.

FFF Settings Calculator	Gcode post processors	Geometric Object Deposition Tool Blog
Tantillus.org	Mini Printable Lathe	How NOT to install a Pololu driver

Reply Quote

Sublime

Re: Work around for Slic3r skipping layers.
February 22, 2012 03:12PM

Registered: 14 years ago
Posts: 2,947

Solved as of 0.7.0

Edited 2 time(s). Last edit at 02/27/2012 01:36AM by Sublime.

FFF Settings Calculator	Gcode post processors	Geometric Object Deposition Tool Blog
Tantillus.org	Mini Printable Lathe	How NOT to install a Pololu driver

Reply Quote

Sound

Re: Work around for Slic3r skipping layers.
February 23, 2012 08:38AM

Registered: 14 years ago
Posts: 228

@Sublime, can you provide a link to the STL file you took these pictures from?

Reply Quote

Sublime

Re: Work around for Slic3r skipping layers.
February 23, 2012 02:23PM

Registered: 14 years ago
Posts: 2,947

The gear is based on Triffid Hunters Herringbone Gears but has been modified to fit on a motor. The files have not been released to the public yet as I am still in testing so I will have to upload them here.

I have zipped it because it exceeds the forums limit. I have included my profile as well.

FFF Settings Calculator	Gcode post processors	Geometric Object Deposition Tool Blog
Tantillus.org	Mini Printable Lathe	How NOT to install a Pololu driver

Reply Quote

Attachments:
open | download - Gear and profile.zip (215.6 KB)

Sound

Re: Work around for Slic3r skipping layers.
February 26, 2012 06:31AM

Registered: 14 years ago
Posts: 228

@Sublime, that model is reported as broken by Netfabb, and has visible glitches. See screenshot:

Schermata2012-02-24a13.53.47.png

You mant want to repair it and retry slicing.

Reply Quote

Sublime

Re: Work around for Slic3r skipping layers.
February 26, 2012 02:52PM

Registered: 14 years ago
Posts: 2,947

Well it has been run through Netfabb and Blender says it is manifolded and shows no errors.

To be sure I didn't upload the wrong file I downloaded it from the link above and ran it through Netfabb again.

Edited 3 time(s). Last edit at 02/27/2012 01:36AM by Sublime.

FFF Settings Calculator	Gcode post processors	Geometric Object Deposition Tool Blog
Tantillus.org	Mini Printable Lathe	How NOT to install a Pololu driver

Reply Quote

TomCeeMe

Re: Work around for Slic3r skipping layers.
February 26, 2012 06:08PM

Registered: 15 years ago
Posts: 55

Sublime,

I've downloaded your zip too, and the Netfabb desktop application shows degenerated faces all around. Are you sure the zip contains the right file? smiling smiley

/tom

regards,
Tom

Reply Quote

Sublime

Re: Work around for Slic3r skipping layers.
February 27, 2012 01:37AM

Registered: 14 years ago
Posts: 2,947

Sorry my fault. Overwrite existing files was turned off and it did not complain about it.

I have sliced the correct file and now the center part is solid from top to bottom (not sure if this is really needed).

I have marked the thread as solved as of slic3r 0.7.0

Thanks again for your hard work. Slic3r is amazing.

FFF Settings Calculator	Gcode post processors	Geometric Object Deposition Tool Blog
Tantillus.org	Mini Printable Lathe	How NOT to install a Pololu driver

Reply Quote

Sound

Re: [solved in 0.7.0] Work around for Slic3r skipping layers.
February 27, 2012 04:28AM

Registered: 14 years ago
Posts: 228

Thank you Sublime, I pay much attention to your precious input and feedback.

Reply Quote