Welcome! Log In Create A New Profile


Unable to print small details

Posted by Cyberpig 
Unable to print small details
July 17, 2012 12:09PM
I'm trying to print the attached stl but is not able to print the pattern on top of the 2nd cylinder from right. The few layers right on top is also not fully printed leaving a small gap at the top of the hinge. Is this is hardware limitation (i'm using a 0.5mm nozzle) or my slic3r setting is incorrect? I've tried printing at default setting and lowering layer height to 0.2mm and increasing fill density but results are still the same.
open | download - Box1.stl (41.1 KB)
Re: Unable to print small details
July 17, 2012 02:07PM
I did not look at the file but from what you said it could be to thin which would require a narrower path. Try setting the nozzle to 0.4

FFF Settings Calculator Gcode post processors Geometric Object Deposition Tool Blog
Tantillus.org Mini Printable Lathe How NOT to install a Pololu driver
Sorry, only registered users may post in this forum.

Click here to login