Welcome! Log In Create A New Profile


Check my stl for me?

Posted by tmorris9 
Check my stl for me?
November 15, 2012 06:13PM
So I have an object I made in Lightwave 3D and it says it's manifold. I load it into meshlab and it says it has zero non manifold edges or vertices, yet slicer (0.7.2 & 0.9.5) say it's non manifold and end up slicing it wrong.

It's a box with holes on all 6 sides but slicer fills in the sides and only leaves the top and bottom open. I will attach the stl and jpg of what the model should look like
open | download - Cabinet1.stl (89.5 KB)
open | download - Screen shot 2012-11-15 at 3.06.02 PM.jpg (119.9 KB)
Re: Check my stl for me?
November 15, 2012 06:50PM
I have you File repair, now it works

Repaired File

Re: Check my stl for me?
November 15, 2012 08:47PM
Thank you.

Can you tell me what was wrong and how you fixed it?

I need to learn for future problems.

Re: Check my stl for me?
November 16, 2012 10:22AM
Your files have holes in the surface as diagnosed using netfabb studio basic (which can also be used to repair it).

Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Sorry, only registered users may post in this forum.

Click here to login