Error while compiling 0.91 firmware (config tool Rev2)

Heres my Configuration.h and the Error.

In file included from Extruder.cpp:23:
C:\#RepRap\Printrboard\arduino0022 Printrboard\arduino-0022\hardware\at90usb1286\cores\at90usb1286/pins_arduino.h:19: error: expected unqualified-id before numeric constant
C:\#RepRap\Printrboard\arduino0022 Printrboard\arduino-0022\hardware\at90usb1286\cores\at90usb1286/pins_arduino.h:22: error: expected unqualified-id before numeric constant

As you can tell I am running a printrboard and as far as I know I have to use the old aduino v0.22 so I changed the file extention from .ino to .pde

I don't think everthing compiles with the old arduino versions.

You need one of the 1.xx versions and also install the Teensy addons to get Printrboard support. In the past there was no version for Arduino 1.x but that has changed.

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!