Case Light always on every reset
I have always turned off and decide when I want to turn on
with M42 P6 S255



have a new problem also
send to script:
, Setting zero Z Center
G28
G0 X0 Y0 Z0 F5000
after this command is not possible to manually move the Z up and down arrows

thanks for the answers

Latest firmware version has now a setting if you want it enabled or disabled. In the online configurator it will show up if you select a pin for case lights.

For the second question I do not see the problem. You go to zero with G28 then you do the same with G1? Do the command get send to the firmware and from which software are you sending, we have 3 which can do it.

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!