Need Help: Error reading file

I tried several codes, this is from the last one that failed

The current codes on my cards are here [www.dropbox.com]

; generated by Slic3r 1.2.9 on 2016-02-01 at 20:01:09

; external perimeters extrusion width = 0.50mm
; perimeters extrusion width = 0.50mm
; infill extrusion width = 0.50mm
; solid infill extrusion width = 0.60mm
; top infill extrusion width = 0.50mm

M190 S80 ; set bed temperature
G28 ; home all axes
M83;
G10 P0 S230 R210                       ; Set tool 0 operating and standby temperatures S240 std
T0

G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
G1 E-3.50000 F2400.00000
G1 Z0.050 F7200.000
G1 X80.909 Y69.552 F7200.000
G1 E3.50000 F2400.00000
G1 X95.626 Y52.431 E1.23350 F1200.000
G1 X96.595 Y51.552 E0.07150
G1 X96.911 Y51.341 E0.02073
G1 X98.496 Y50.660 E0.09429
G1 X98.726 Y50.607 E0.01287
G1 X99.882 Y50.479 E0.06356
G1 X100.118 Y50.479 E0.01288
G1 X101.274 Y50.607 E0.06356 F1200.000
G1 X101.504 Y50.660 E0.01287
G1 X103.089 Y51.341 E0.09429
G1 X103.405 Y51.552 E0.02073
G1 X104.374 Y52.431 E0.07150
G1 X150.171 Y105.707 E3.83843
G1 X150.688 Y106.320 E0.04379
G1 X151.230 Y107.094 E0.05165
G1 X151.551 Y107.653 E0.03519
G1 X151.979 Y108.604 E0.05701
G1 X152.171 Y109.173 E0.03282
G1 X152.388 Y110.068 E0.05033
G1 X152.480 Y110.673 E0.03340
G1 X152.538 Y111.305 E0.03467
G1 X152.560 Y111.967 E0.03622
G1 X152.539 Y113.030 E0.05806
G1 X152.506 Y113.490 E0.02522
G1 X152.413 Y114.290 E0.04398
G1 X152.313 Y114.870 E0.03215
G1 X152.120 Y115.710 E0.04710
G1 X151.917 Y116.381 E0.03833
G1 X151.594 Y117.244 E0.05034
G1 X151.263 Y117.961 E0.04314
G1 X150.781 Y118.829 E0.05426
G1 X150.318 Y119.527 E0.04575
G1 X149.647 Y120.382 E0.05941
G1 X149.081 Y120.998 E0.04567
G1 X148.192 Y121.824 E0.06631
G1 X147.576 Y122.316 E0.04309
G1 X146.385 Y123.130 E0.07879
G1 X108.314 Y148.509 E2.49989
G1 X106.419 Y149.297 E0.11212
G1 X105.367 Y149.402 E0.05779
G1 X94.633 Y149.402 E0.58645
G1 X92.620 Y149.006 E0.11212
G1 X91.686 Y148.509 E0.05779
G1 X53.615 Y123.130 E2.49989
G1 X52.424 Y122.316 E0.07879
G1 X51.808 Y121.824 E0.04309
G1 X50.919 Y120.998 E0.06631
G1 X50.353 Y120.382 E0.04567
G1 X49.682 Y119.527 E0.05941
G1 X49.219 Y118.829 E0.04576
G1 X48.737 Y117.961 E0.05425
G1 X48.406 Y117.244 E0.04313
G1 X48.083 Y116.381 E0.05034
G1 X47.880 Y115.710 E0.03833
G1 X47.687 Y114.870 E0.04710
G1 X47.587 Y114.290 E0.03215
G1 X47.494 Y113.490 E0.04398
G1 X47.440 Y112.289 E0.06571
G1 X47.462 Y111.305 E0.05377
G1 X47.520 Y110.673 E0.03467
G1 X47.612 Y110.068 E0.03340
G1 X47.829 Y109.173 E0.05033
G1 X48.021 Y108.604 E0.03282
G1 X48.449 Y107.653 E0.05701
G1 X48.770 Y107.094 E0.03519
G1 X49.312 Y106.320 E0.05165
G1 X49.829 Y105.707 E0.04379
G1 X80.860 Y69.609 E2.60084
G1 X81.407 Y69.980 F7200.000
G1 X96.124 Y52.860 E1.23350 F1200.000
G1 X96.973 Y52.089 E0.06266
G1 X97.264 Y51.895 E0.01911
G1 X98.654 Y51.298 E0.08263
G1 X98.869 Y51.248 E0.01205
G1 X99.882 Y51.137 E0.05570
G1 X100.118 Y51.137 E0.01287
G1 X101.131 Y51.248 E0.05570 F1200.000
G1 X101.346 Y51.298 E0.01205
G1 X102.736 Y51.895 E0.08263
G1 X103.027 Y52.089 E0.01911
G1 X103.876 Y52.860 E0.06266
G1 X149.673 Y106.135 E3.83843
G1 X150.185 Y106.743 E0.04342
G1 X150.660 Y107.422 E0.04526
G1 X150.981 Y107.980 E0.03519
G1 X151.356 Y108.814 E0.04996
G1 X151.548 Y109.383 E0.03282
G1 X151.739 Y110.168 E0.04411
G1 X151.831 Y110.772 E0.03340
G1 X151.882 Y111.326 E0.03038
G1 X151.903 Y111.988 E0.03622
G1 X151.882 Y113.011 E0.05589
G1 X151.760 Y114.214 E0.06606
G1 X151.673 Y114.722 E0.02818
G1 X151.479 Y115.562 E0.04710
G1 X151.302 Y116.151 E0.03359
G1 X150.979 Y117.014 E0.05034
G1 X150.689 Y117.642 E0.03780
G1 X150.207 Y118.510 E0.05426
G1 X149.801 Y119.121 E0.04009
G1 X149.130 Y119.977 E0.05941
G1 X148.634 Y120.516 E0.04003
G1 X147.745 Y121.342 E0.06631
G1 X147.205 Y121.774 E0.03776
G1 X146.021 Y122.583 E0.07836
G1 X107.950 Y147.963 E2.49989
G1 X105.367 Y148.745 E0.14746
G1 X94.633 Y148.745 E0.58645
G1 X92.050 Y147.963 E0.14746
G1 X53.979 Y122.583 E2.49989
G1 X52.795 Y121.774 E0.07836
G1 X52.255 Y121.342 E0.03776
G1 X51.366 Y120.516 E0.06631
G1 X50.870 Y119.977 E0.04003
G1 X50.199 Y119.121 E0.05941
G1 X49.793 Y118.510 E0.04010
G1 X49.311 Y117.642 E0.05425
G1 X49.021 Y117.014 E0.03780
G1 X48.698 Y116.151 E0.05034
G1 X48.521 Y115.562 E0.03359
G1 X48.327 Y114.722 E0.04710
G1 X48.240 Y114.214 E0.02818
G1 X48.147 Y113.414 E0.04398
G1 X48.097 Y112.270 E0.06260
G1 X48.118 Y111.326 E0.05160
G1 X48.169 Y110.772 E0.03038
G1 X48.261 Y110.168 E0.03340
G1 X48.452 Y109.383 E0.04410
G1 X48.644 Y108.814 E0.03282
G1 X49.019 Y107.980 E0.04996
G1 X49.340 Y107.422 E0.03519
G1 X49.815 Y106.743 E0.04526
G1 X50.327 Y106.135 E0.04342
G1 X81.358 Y70.037 E2.60084
G1 E-3.50000 F2400.00000
G1 X92.373 Y72.316 F7200.000
G1 E3.50000 F2400.00000
G1 X92.917 Y69.718 E0.14506 F1200.000
G1 X93.328 Y67.642 E0.11558
G1 X94.548 Y61.133 E0.36183
G1 X95.074 Y58.442 E0.14982
G1 X95.308 Y57.365 E0.06023
G1 X95.537 Y56.446 E0.05174
G1 X95.769 Y55.668 E0.04436
G1 X96.031 Y54.967 E0.04089
G1 X96.370 Y54.287 E0.04151
G1 X96.549 Y53.999 E0.01853
G1 X96.714 Y53.784 E0.01480
G1 X97.030 Y53.401 E0.02716
G1 X97.380 Y53.078 E0.02597
G1 X97.638 Y52.896 E0.01725
G1 X98.075 Y52.615 E0.02841
G1 X98.618 Y52.382 E0.03228
G1 X99.290 Y52.223 E0.03773
G1 X99.685 Y52.180 E0.02170
G1 X100.090 Y52.180 E0.02214
G1 X100.315 Y52.180 E0.01231 F1200.000
G1 X100.710 Y52.223 E0.02170
G1 X101.382 Y52.382 E0.03773
G1 X101.925 Y52.615 E0.03228
G1 X102.294 Y52.851 E0.02396
G1 X102.620 Y53.078 E0.02171
G1 X102.970 Y53.401 E0.02597
G1 X103.451 Y53.999 E0.04196
G1 X103.630 Y54.287 E0.01853
G1 X103.866 Y54.738 E0.02784
G1 X104.181 Y55.523 E0.04618
G1 X104.437 Y56.353 E0.04748
G1 X104.692 Y57.365 E0.05699
G1 X104.933 Y58.472 E0.06188
G1 X107.004 Y69.330 E0.60399
G1 X108.594 Y76.870 E0.42102
G1 X108.964 Y78.718 E0.10293
G1 X109.231 Y80.163 E0.08031
G1 X109.463 Y81.573 E0.07806
G1 X109.962 Y85.223 E0.20129
G1 X110.125 Y86.168 E0.05241
G1 X110.293 Y86.891 E0.04051
G1 X110.477 Y87.453 E0.03230
G1 X110.658 Y87.841 E0.02343
G1 X110.871 Y88.150 E0.02049
G1 X111.110 Y88.386 E0.01838
G1 X111.512 Y88.685 E0.02737
G1 X112.099 Y89.026 E0.03707
G1 X112.858 Y89.387 E0.04593
G1 X113.794 Y89.771 E0.05530
G1 X114.860 Y90.165 E0.06207
G1 X118.659 Y91.504 E0.22008
G1 X121.525 Y92.597 E0.16761
G1 X124.231 Y93.701 E0.15964
G1 X126.301 Y94.584 E0.12296
G1 X129.966 Y96.227 E0.21946
G1 X134.059 Y98.153 E0.24712
G1 X138.208 Y100.199 E0.25278
G1 X140.204 Y101.225 E0.12259
G1 X142.080 Y102.223 E0.11613
G1 X143.836 Y103.200 E0.10976
G1 X145.372 Y104.110 E0.09757
G1 X146.687 Y104.967 E0.08577
G1 X147.828 Y105.825 E0.07795
G1 X148.655 Y106.571 E0.06088
G1 X148.826 Y106.749 E0.01351
G1 X149.491 Y107.538 E0.05635
G1 X149.675 Y107.802 E0.01760
G1 X150.165 Y108.654 E0.05370
G1 X150.311 Y108.978 E0.01943
G1 X150.610 Y109.865 E0.05111
G1 X150.684 Y110.170 E0.01715
G1 X150.836 Y111.251 E0.05966
G1 X150.862 Y112.185 E0.05108
G1 X150.826 Y113.216 E0.05635
G1 X150.678 Y114.391 E0.06466
G1 X150.436 Y115.445 E0.05909
G1 X150.367 Y115.673 E0.01305
G1 X149.955 Y116.774 E0.06420
G1 X149.842 Y117.018 E0.01469
G1 X149.225 Y118.128 E0.06939
G1 X149.068 Y118.366 E0.01558
G1 X148.221 Y119.446 E0.07497
G1 X148.028 Y119.655 E0.01556
G1 X146.937 Y120.669 E0.08142
G1 X146.727 Y120.837 E0.01467
G1 X145.378 Y121.759 E0.08925
G1 X145.170 Y121.882 E0.01321
G1 X143.573 Y122.686 E0.09771
G1 X141.633 Y123.459 E0.11406
G1 X139.564 Y124.132 E0.11888
G1 X137.378 Y124.737 E0.12395
G1 X135.094 Y125.293 E0.12844
G1 X132.737 Y125.813 E0.13185
G1 X130.327 Y126.313 E0.13450
G1 X116.383 Y129.104 E0.77694
G1 X115.094 Y129.263 E0.07093
G1 X114.133 Y129.405 E0.05309
G1 X113.315 Y129.577 E0.04567
G1 X112.589 Y129.804 E0.04154
G1 X112.091 Y130.036 E0.03003
G1 X111.695 Y130.310 E0.02632
G1 X111.358 Y130.650 E0.02616
G1 X111.054 Y131.091 E0.02930
G1 X110.675 Y131.915 E0.04955
G1 X110.299 Y133.109 E0.06841
G1 X109.974 Y134.561 E0.08129
G1 X109.704 Y136.215 E0.09154
G1 X109.472 Y138.118 E0.10476
G1 X109.283 Y140.126 E0.11017
G1 X108.855 Y145.787 E0.31020
G1 X106.779 Y147.702 E0.15429
G1 X93.221 Y147.702 E0.74073
G1 X91.145 Y145.787 E0.15429
G1 X90.717 Y140.126 E0.31020
G1 X90.528 Y138.118 E0.11017
G1 X90.296 Y136.215 E0.10476
G1 X90.026 Y134.561 E0.09154
G1 X89.701 Y133.109 E0.08129
G1 X89.325 Y131.915 E0.06841
G1 X88.946 Y131.091 E0.04955
G1 X88.642 Y130.650 E0.02930
G1 X88.258 Y130.271 E0.02947
G1 X87.862 Y130.010 E0.02591
G1 X87.411 Y129.804 E0.02712
G1 X86.685 Y129.577 E0.04154
G1 X85.867 Y129.405 E0.04567
G1 X84.906 Y129.263 E0.05309
G1 X83.617 Y129.104 E0.07093
G1 X69.673 Y126.313 E0.77694
G1 X67.263 Y125.813 E0.13451
G1 X64.906 Y125.293 E0.13185
G1 X62.622 Y124.737 E0.12844
G1 X60.436 Y124.132 E0.12395
G1 X58.473 Y123.497 E0.11270
G1 X56.577 Y122.753 E0.11131
G1 X54.830 Y121.882 E0.10664
G1 X54.622 Y121.759 E0.01321
G1 X53.273 Y120.837 E0.08925
G1 X53.063 Y120.669 E0.01467
G1 X51.972 Y119.655 E0.08142
G1 X51.779 Y119.446 E0.01556
G1 X50.932 Y118.366 E0.07498
G1 X50.775 Y118.128 E0.01558
G1 X50.158 Y117.018 E0.06939
G1 X50.045 Y116.774 E0.01469
G1 X49.633 Y115.673 E0.06421
G1 X49.564 Y115.444 E0.01305
G1 X49.322 Y114.391 E0.05909
G1 X49.163 Y113.060 E0.07323
G1 X49.138 Y112.185 E0.04779
G1 X49.164 Y111.251 E0.05107
G1 X49.316 Y110.170 E0.05965
G1 X49.390 Y109.865 E0.01714
G1 X49.689 Y108.978 E0.05111
G1 X49.835 Y108.654 E0.01943
G1 X50.325 Y107.802 E0.05370
G1 X50.509 Y107.538 E0.01760
G1 X51.174 Y106.749 E0.05634
G1 X51.345 Y106.571 E0.01351
G1 X52.172 Y105.825 E0.06088
G1 X53.407 Y104.902 E0.08422
G1 X54.691 Y104.071 E0.08358
G1 X56.206 Y103.176 E0.09610
G1 X57.920 Y102.223 E0.10715
G1 X59.796 Y101.225 E0.11613
G1 X61.792 Y100.199 E0.12259
G1 X63.861 Y99.166 E0.12635
G1 X67.247 Y97.517 E0.20577
G1 X67.274 Y97.518 E0.00148
G1 X70.019 Y96.234 E0.16557
G1 X71.920 Y95.370 E0.11410
G1 X74.108 Y94.409 E0.13055
G1 X76.978 Y93.198 E0.17022
G1 X79.948 Y92.025 E0.17445
G1 X82.660 Y91.029 E0.15785
G1 X85.147 Y90.162 E0.14388
G1 X86.206 Y89.771 E0.06168
G1 X87.142 Y89.387 E0.05530
G1 X87.923 Y89.014 E0.04731
G1 X88.488 Y88.685 E0.03569
G1 X88.927 Y88.354 E0.03003
G1 X89.129 Y88.150 E0.01572
G1 X89.316 Y87.886 E0.01767
G1 X89.508 Y87.490 E0.02402
G1 X89.707 Y86.891 E0.03452
G1 X89.875 Y86.168 E0.04051
G1 X90.038 Y85.223 E0.05241
G1 X90.530 Y81.615 E0.19894
G1 X90.769 Y80.163 E0.08040
G1 X91.404 Y76.880 E0.18273
G1 X92.358 Y72.390 E0.25080
G1 X93.016 Y72.453 F7200.000
G1 X93.561 Y69.851 E0.14526 F1200.000
G1 X93.973 Y67.767 E0.11607
G1 X95.193 Y61.256 E0.36193
G1 X95.711 Y58.603 E0.14769
G1 X95.949 Y57.510 E0.06110
G1 X96.173 Y56.613 E0.05053
G1 X96.436 Y55.749 E0.04936
G1 X96.724 Y55.029 E0.04232
G1 X96.943 Y54.609 E0.02593
G1 X97.090 Y54.373 E0.01516
G1 X97.508 Y53.854 E0.03640
G1 X97.794 Y53.591 E0.02125
G1 X98.384 Y53.197 E0.03874
G1 X98.828 Y53.007 E0.02641
G1 X99.398 Y52.872 E0.03199
G1 X99.721 Y52.837 E0.01775
G1 X100.000 Y52.837 E0.01528
G1 X100.279 Y52.837 E0.01523 F1200.000

Edited 3 time(s). Last edit at 02/05/2016 01:30AM by Fpex.

---

----- Making the world smarter @ www.xetal.eu
----- Helping entrepreneurs @ www.fralke.com

The reason it is not waiting is that you do not have any "wait for temperature" commands in your start code. I'm no longer using Slic3r, but maybe someone could post their start G-code for you to use.

Here's what I used for Cura:

G21
G90 ;absolute positioning
M83 ; use relative distances for extrusion
M203 X6000 Y6000 Z240 E3000 ; Allows 100mm/s speeds
G1 Z5 F200 ; lift nozzle
G1 X2 Y50 F2000; Go to wait for warm position
M140 S{print_bed_temperature} ; Set bed temp
M116; Wait for bed temperature
T1 ; Select extruder 1
M104 S{print_temperature} ; Set extruder temp
M116; Wait for extruder temperature as well

Dave

The code is the form the standard RRP profiles for the ormerod and it worked fine with the RRP firmware. Not with DC42 one.
I guess it is because there is a difference!

What do you use for gcode? I use slic3r only for the ormerod because i did not managed to use anything else

Anyhow, this is the least of my problems :-)

Edited 1 time(s). Last edit at 02/04/2016 10:10AM by Fpex.

---

----- Making the world smarter @ www.xetal.eu
----- Helping entrepreneurs @ www.fralke.com

I correct myself - the M190 code should have resulted in the firmware waiting for the bed to reach the set temperature (80 degrees). I am surprised that DC42's firmware does not do so.

I use Simplify 3D to slice (it is not freeware).

Dave

M190 works, the problem is on the hot end. G10 with DC42 firmware does not force to wait. To be honest, it is a minor thing as i do not mind loosing the skirt a bit but avoid hoozing at home.

BTW I have simplify but i never managed to have any useable code for the ormerod :-(

Edited 2 time(s). Last edit at 02/04/2016 11:31AM by Fpex.

---

----- Making the world smarter @ www.xetal.eu
----- Helping entrepreneurs @ www.fralke.com

strange you must have something setup wrong, worked for me from the first print. What is going wrong with it?

The real problem is that my printer is stopping printing after few layers as if it reaches end of file. I tried all sort of things, the only thing left are using a different supply and a different duet, but I only have a duet 0.8.5 to swap.
After that I have no idea what to do.

---

----- Making the world smarter @ www.xetal.eu
----- Helping entrepreneurs @ www.fralke.com

G10 has never waited for temperatures to be reached. However, your T0 command will, if you have tool change macros set up to wait for temperatures. They would normally be set up that way for a dual nozzle printer, but not for a single nozzle.

---

Large delta printer [miscsolutions.wordpress.com], E3D tool changer, Robotdigg SCARA printer, Crane Quad and Ormerod

Disclosure: I design Duet electronics and work on RepRapFirmware, [duet3d.com].

In the RRP firmware T0 waited, though. Anyhow, this is not something that i ever considered a problem, but just a due to a change in firmware. I do like that the hot end is not fully ready when it goes for the skirt, so i changed my start code anyhow into

M190 S80
G28
M83;
G10 P0 S150 R210
M116
G10 P0 S235 R210
T0

My problem stays, I now looking at replacing the duet 0.6 with the 0.8.5 and see what happens. If this fails, I might have to open uo every single RRP wire to see if there is no hidden damage in them

Edited 2 time(s). Last edit at 02/04/2016 03:40PM by Fpex.

---

----- Making the world smarter @ www.xetal.eu
----- Helping entrepreneurs @ www.fralke.com

I think you must have had tool change files for tool 0 in your sys directory when you were using RRP firmware, but you deleted them when you switched to mine. Either that, or you are not homing the axes before printing - because my fork does not run the tool change files if the printer is not homed (because it is not safe to do so in general).

---

Large delta printer [miscsolutions.wordpress.com], E3D tool changer, Robotdigg SCARA printer, Crane Quad and Ormerod

Disclosure: I design Duet electronics and work on RepRapFirmware, [duet3d.com].

I am not homing. I let it do by the gcode, so explained. :-)

---

----- Making the world smarter @ www.xetal.eu
----- Helping entrepreneurs @ www.fralke.com

Quote
Fpex
I am not homing. I let it do by the gcode, so explained. :-)

Glad we solved it. I suggest you change the start gcode to home before executing T0 then. You can home Z again when the nozzle if hot if you want.

---

Large delta printer [miscsolutions.wordpress.com], E3D tool changer, Robotdigg SCARA printer, Crane Quad and Ormerod

Disclosure: I design Duet electronics and work on RepRapFirmware, [duet3d.com].

Good idea, but first i need ti solve me real problem ... :-(
and I am hating the fact that the two duet are few differences making it difficult to easily swap in a way that can always go back.

Edited 1 time(s). Last edit at 02/04/2016 04:29PM by Fpex.

---

----- Making the world smarter @ www.xetal.eu
----- Helping entrepreneurs @ www.fralke.com

Hi,

can you please do us a little favor?
Next time you post some more lines of G-code please youse the code-tag. Just start with
[ code ]

and stop with
[ /code ]

in both cases without the spaces. This reduces the shown lines in your post and each character uses the same width.

---

Slicer: Simplify3D 4.0; sometimes CraftWare 1.14 or Cura 2.7
Delta with Duet-WiFi, FW: 1.20.1RC2; mini-sensor board by dc42 for auto-leveling
Ormerod common modifications: Mini-sensor board by dc42, aluminum X-arm, 0.4 mm nozzle E3D like, 2nd fan, Z stepper nut M5 x 15, Herringbone gears, Z-axis bearing at top, spring loaded extruder with pneumatic fitting, Y belt axis tensioner
Ormerod 2: FW: 1.19-dc42 on Duet-WiFi. own build, modifications: GT2-belts, silicone heat-bed, different motors and so on. Printed parts: bed support, (PSU holder) and Y-feet.
Ormerod 1: FW: 1.15c-dc42 on 1k Duet-Board. Modifications: Aluminium bed-support, (nearly) all parts reprinted in PLA/ ABS, and so on.

A question, does the duet 0.6 has a ground plane or is is using just ground traces?
If the latter, than i know what the issues is ... the crappy board ground is gone (probably damaged when my older bed broke). I truly hope not.

UPDATE: I would like to thank everybody, it looks like my duet0.6 is the culprit. I am now printing with the 0.8.5 ... so far it is printing beyond few layers. If the prints complete, then I will give the old duet to a friend for reflowing and check, but at least my problem is solved.

Edited 2 time(s). Last edit at 02/05/2016 04:10AM by Fpex.

---

----- Making the world smarter @ www.xetal.eu
----- Helping entrepreneurs @ www.fralke.com