Re: Part dimensions and drawings
July 25, 2008 05:48PM
here's what i have modeled so far: []

I'll start on the drawings when I get time.
Re: Part dimensions and drawings
July 27, 2008 01:36AM
Doing good work there, slade. Remember to post the files as you finish them!
Re: Part dimensions and drawings
August 20, 2008 11:01PM
man, I made all these models, made the drawings, and then never got around to posting them. sorry guys, i've been busy/apathetic/*insert other excuses here*.


feel free to check over the drawings, some dimensions may be incorrect or there may be other mistakes, so I'll update them as need be. I also modified some of the parts to make the extruder easier to make with a mill and lathe.

Disclaimer: keep in mind that these drawings are really really lazily done. I left off a lot of things that should be there, like datums and geometric tolerances. in fact, I pretty much left everything without tolerances. I assumed this would be fine because the tolerances are rather loose to begin with, and the drawings aren't going to a vendor or anything like that anyway.
Sorry, only registered users may post in this forum.

Click here to login