Welcome! Log In Create A New Profile

Advanced

so, here i amsmiling smiley my first printer

Posted by woo 
Forum List Message List New Topic
woo
Re: so, here i amsmiling smiley my first printer
August 15, 2013 01:38AM
windows+automatic updates+reboot sad smiley

7 hours of printing ruined....(left overnight)
[imageshack.us]

Edited 2 time(s). Last edit at 08/15/2013 01:40AM by woo.
Reply Quote
woo
Re: so, here i amsmiling smiley my first printer
September 28, 2013 04:16PM
[www.youtube.com]
Reply Quote
Yvan
Re: so, here i amsmiling smiley my first printer
September 28, 2013 09:21PM
So how did the quality turn out? What speed settings were you using BTW?

Yvan

Singularity Machine
Reply Quote
ekaggrat
Re: so, here i amsmiling smiley my first printer
September 28, 2013 10:32PM
sd card the way to go........
Reply Quote
woo
Re: so, here i amsmiling smiley my first printer
September 29, 2013 02:05AM
Yvan Wrote:
-------------------------------------------------------
> So how did the quality turn out? What speed
> settings were you using BTW?

I think 190 mm/sec. Quality is fine,perimeters were very good but infill layers are not sticking together,i think too low temperature so i stopped print.
I need better camera,
my phone camera has to low fps...
Reply Quote
Yvan
Re: so, here i amsmiling smiley my first printer
September 29, 2013 02:14AM
Cool, I'm staying at 30 mm/s with my shaky Prusa i3 for now.

How about slightly more heat, slightly less speed with the infill, and slightly less infill? Infill is barely needed some times.

Yvan

Singularity Machine
Reply Quote
woo
Re: so, here i amsmiling smiley my first printer
September 29, 2013 11:23AM
this is only for testing controllers, becouse some people had problems with skipping steps(tb6560), but no problems here.

i actually print closer to 30-35 mm/sec for everyday prints...i have a lot time so why hurry smiling smiley but good to know that i can go fast. maybe i shall try bowden mod....hm....i have one bowden tube laying arroud and waiting new printer...maybe 250-300 mm /sec is possible....
Reply Quote
woo
Re: so, here i amsmiling smiley my first printer
October 26, 2013 06:51AM
Printed @ 0.05 mm layers

Reply Quote
woo
Re: so, here i amsmiling smiley my first printer
October 27, 2013 07:12AM
very high resolution possible with good adjusted printer smiling smiley

this is @ 0.05 mm Z layer height with 0.4 mm E3D hotendsmiling smiley 1 layer, waterproof tested vase smiling smiley

now i still have to do better stl and maximize slicer software resolution smiling smiley
Reply Quote
Attachments:
open | download - IMG_20131027_115814.jpg (440.2 KB)
open | download - P8200053.JPG (488.9 KB)
woo
Re: so, here i amsmiling smiley my first printer
December 10, 2013 01:34PM

smoking smiley
Reply Quote
woo
Re: so, here i amsmiling smiley my first printer
May 26, 2014 02:09PM


Parts for new printer..
Heated chamber
Dual bowden E3D
All axis belt driven
Z axis belt-nema23-toshiba6600
Corexy
Etc.

Max speed approx 800 mm/sec with acceleration about 9000 mm/sec2 on all axis(Z too)

For now tested 700 with this steppers and controllers with setup like replicator style

All guides 12 mm,

Welded and cnc machined frame

Stay tuned
Reply Quote
Page 2 of 2    Pages: Previous12
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login