Welcome! Log In Create A New Profile

Advanced

Will pay for 3D parts for Mendel [$$]

Posted by docphil 
Will pay for 3D parts for Mendel [$$]
May 29, 2011 05:20PM
Hey guys,

I am building a Mendel, and I am looking for a set of 3D parts to buy. The commercial Rapid Prototyping companies seem to charge too much, but I would also appreciate suggestions if you know of a good company.

Also, I am considering redesigning the Mendel to work with waterjet (possibly lasercut) parts. Unlike the current lasercut design, which is to make the 3D parts from 2D cuts, I would like to remove the need for so much 3D printed material. If you can provide me with cheap 3D printed parts I would be happy to share any early progress with you.

Best,
Phillip Daniel
Email: docphil@mit.edu
Re: Will pay for 3D parts for Mendel [$$]
May 30, 2011 02:00AM
Perhaps you want to try here: [forums.reprap.org]
or here: [reprap.org]


Generation 7 Electronics Teacup Firmware RepRap DIY
     
Re: Will pay for 3D parts for Mendel [$$]
April 15, 2013 08:02AM
It would also be nice to be able to find a sketch up with dimensions of the parts, so that you can at least fabricate them yourself.
Sorry, only registered users may post in this forum.

Click here to login