Welcome! Log In Create A New Profile


Punching CNC with ramps 1.4

Posted by Elisha Mbise 
Punching CNC with ramps 1.4
March 13, 2020 02:40PM
Hi folks. I want to make a CNC punching machine using arduino and ramps 1.4. I expect to control only X&Y stepper motors and a solenoid valve. Would it be possible?
Anyone with help please! I will appreciate very much.

Edited 1 time(s). Last edit at 03/13/2020 02:43PM by Elisha Mbise.
Re: Punching CNC with ramps 1.4
March 13, 2020 11:42PM
... yes, is "doable" -- it's as simple, as moving with "G0 Xxxx Yyyy" to a position and switching a solenoid with "M42 Ppp Sss" ...

Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]
Re: Punching CNC with ramps 1.4
March 19, 2020 05:10PM
you didn't say what material, what thickness and what die size, die shape, die angle etc.. you need to decide early in the project so that all your mechanical loads are right there for reference. you may want to test a punch with a load measuring device to get that data before you start.
Sorry, only registered users may post in this forum.

Click here to login