Welcome! Log In Create A New Profile

Problems with retraction in skeinforge

Posted by Gaterade

Gaterade

Problems with retraction in skeinforge
July 16, 2011 11:03AM

Registered: 14 years ago
Posts: 4

Hi

I am trying to setup skeinforge for my mendel from mendel-parts with GEN6 electronics. I've run into a problem with getting the retraction function, under dimensions, to work. No matter which values i use the extruder won't retract.
Am I missing something ?

-Kasper

Reply Quote

jim_blag

Re: Problems with retraction in skeinforge
July 16, 2011 11:28AM

Registered: 15 years ago
Posts: 113

Check the E values in the resulting GCode file. Make sure you can spot sections where E values are less than the previous value (indicating a retraction).

What values are you using in dimension for retraction?

JB

--
Check out my blog: AdventuresIn3-DPrinting

Reply Quote

Gaterade

Re: Problems with retraction in skeinforge
July 16, 2011 11:55AM

Registered: 14 years ago
Posts: 4

I am using extruder retraction speed 30 mm/s, retraction distance 5 mm, and restart 0. And just checked the G-code and there is no sign of the retraction.

Reply Quote

jcabrer

Re: Problems with retraction in skeinforge
July 16, 2011 08:30PM

Registered: 18 years ago
Posts: 824

make the distance like 50mm

Reply Quote

NelsonRap

Re: Problems with retraction in skeinforge
July 17, 2011 01:24AM

Registered: 14 years ago
Posts: 862

Funny in the SF thread I was told to use 16mm/s and 0.6 which is much better than large numbers

__________________________________________________________________________
Experimenting in 3D in New Zealand

Reply Quote

Gaterade

Re: Problems with retraction in skeinforge
July 17, 2011 06:33AM

Registered: 14 years ago
Posts: 4

I just checked the gcode again, and i think i found the problem in it.
G-code snippit:
G1 X73.76 Y72.15 E15.1766
G1 X73.29 Y72.28 E15.926
G1 X72.78 Y72.61 E16.8649
G1 F1800.0
;6.8649

As I see it there needs to say G1 E6.8649 in the last line, but i have no idea why it doesn't :|

Reply Quote

Gaterade

Re: Problems with retraction in skeinforge
July 17, 2011 06:47AM

Registered: 14 years ago
Posts: 4

Found the problem. It was the replace.csv that replaced the retraction gcode. Thanks for your help smiling smiley