Copying firmware to upgrade printer

Hi.
I don't know alot about micro controller so if somebody can help me.
Is it possible to upload this firmware or settings from this controller
control system based on STM32 processor, paired with the ARM Coretex M3, running a dominant frequency of 72MHz,
to a GT2560 controller?

I like to upgrade my printer which is almost the same except controller and I have GT2560 controler this one have some self developed controler.
control system based on STM32 processor, paired with the ARM Coretex M3, running a dominant frequency of 72MHz,
[www.ebay.com]

No to the firmware... this is like giving an Englishman a Japanese book

They just don’t speak the same language

NB a GT2560 is a downgrade from a GTM32 based system..

The first is a 16Mhz 8bit machine, the latter is a 32bit 72Mhz machine..

If your lucky you can get some setting with the m503 command that you can copy into the new board.