CAPA supplies in NZ
Posted by Ross
|
CAPA supplies in NZ January 15, 2009 09:25PM |
|
Re: CAPA supplies in NZ January 19, 2009 12:08AM |
Registered: 17 years ago Posts: 235 |
|
Re: CAPA supplies in NZ January 19, 2009 10:37PM |
Registered: 17 years ago Posts: 8 |
I though these guys looked promising - haven't contacted them yet but the stock on their website looked pretty comprehensive.
[www.plasticweldrods.co.nz]
[www.plasticweldrods.co.nz]
|
Re: CAPA supplies in NZ January 20, 2009 08:07AM |
Registered: 16 years ago Posts: 84 |
If you find anything very good remember to post back here... Who knows, perhaps you'll find something Vik missed. According to [forums.reprap.org] ABS is ~NZ$40 + postage for 100m roll.
Edited 2 time(s). Last edit at 01/20/2009 08:12AM by Nil Einne.
Edited 2 time(s). Last edit at 01/20/2009 08:12AM by Nil Einne.
|
Re: CAPA supplies in NZ January 21, 2009 03:42PM |
Imagin Plastics (the website mentioned above) are also not able to supply CAPA either.
I suspect our only option is to import it.
I purchased some ABS from CARR to use in setup and first tests (when I finally get my machine working).
Reece, how is the HDPE working out? Print quality etc.
I suspect our only option is to import it.
I purchased some ABS from CARR to use in setup and first tests (when I finally get my machine working).
Reece, how is the HDPE working out? Print quality etc.
|
Re: CAPA supplies in NZ January 22, 2009 09:40PM |
Registered: 17 years ago Posts: 235 |
|
Re: CAPA supplies in NZ February 21, 2009 08:02AM |
Registered: 16 years ago Posts: 242 |
|
Bulk order some? June 17, 2009 02:57AM |
Admin Registered: 18 years ago Posts: 183 |
|
Re: Bulk order some? June 17, 2009 03:03AM |
Registered: 16 years ago Posts: 242 |
Hi Vic,
I see your activity on the threads tonight...
I'm still expecting to be asking you for some PLA and/or ABS in due course,
My machine's still coming together though. Some beastly problems with the default linker file for my 32 bit micro, but I'm working around them for now.
I think Catalyst are a wellington Co, might be interesting to compare machines at some stage later.
Graham Daniel
I see your activity on the threads tonight...
I'm still expecting to be asking you for some PLA and/or ABS in due course,
My machine's still coming together though. Some beastly problems with the default linker file for my 32 bit micro, but I'm working around them for now.
I think Catalyst are a wellington Co, might be interesting to compare machines at some stage later.
Graham Daniel
|
Re: Bulk order some? June 17, 2009 03:43AM |
Admin Registered: 18 years ago Posts: 183 |
|
Re: Bulk order some? June 21, 2009 02:06AM |
Registered: 15 years ago Posts: 458 |
|
Re: Bulk order some? June 21, 2009 05:10PM |
Admin Registered: 18 years ago Posts: 183 |
|
Re: CAPA supplies in NZ June 23, 2009 03:42AM |
Registered: 15 years ago Posts: 458 |
I bought some polymorh from Jaycar today, while I was at lunch (the shop is just a short 10 minute walk away), heated some a few pellets, which turned nicely transparent, and was not hot to touch, and fun to play with.
To play with I put a small 0402 (smaller than a quarter the size of a grain of rice) sized LED into the lump of polymorh, let it cool and plugged it into the power supply (2.5V @ 0.02mA), the polymorph does well to spread light from the LED all the way around the polymorh lump fairly evenly.
To play with I put a small 0402 (smaller than a quarter the size of a grain of rice) sized LED into the lump of polymorh, let it cool and plugged it into the power supply (2.5V @ 0.02mA), the polymorph does well to spread light from the LED all the way around the polymorh lump fairly evenly.
|
Re: CAPA supplies in NZ June 23, 2009 06:03AM |
Admin Registered: 18 years ago Posts: 183 |
Sorry, only registered users may post in this forum.