Welcome! Log In Create A New Profile

Marlin 2.0.5.3 "err: EEPROM Version" on ReArm

G3DBuilder

Marlin 2.0.5.3 "err: EEPROM Version" on ReArm
April 10, 2020 09:43AM

Registered: 6 years ago
Posts: 23

Had a successful upload of Marlin 2.0.5.3 to a ReArm CPU, However I am now getting "err: EEPROM Version"

Did an M502 and then an M500, but error persists.

This is a new install not an update.

Anybody have this issue? FIX?

Thanks for the assistance.

Reply Quote

G3DBuilder

Re: Marlin 2.0.5.3 "err: EEPROM Version" on ReArm
April 10, 2020 09:57AM

Registered: 6 years ago
Posts: 23

I guess I Fixed this issue, I am not sure why. I tried an EEPROM Initialize, then a re-boot but the problem remains.

Next I inserted an SD Card into the RRD Full Graphics Display and then removed it. Problem went away and display is normal.

I am not sure what the SD Card has to do with the EEPROM.

Reply Quote

Roberts_Clif

Re: Marlin 2.0.5.3 "err: EEPROM Version" on ReArm
April 10, 2020 08:33PM

Registered: 6 years ago
Posts: 1,863

Quote
G3DBuilder
I guess I Fixed this issue, I am not sure why. I tried an EEPROM Initialize, then a re-boot but the problem remains.

Next I inserted an SD Card into the RRD Full Graphics Display and then removed it. Problem went away and display is normal.

I am not sure what the SD Card has to do with the EEPROM.

Sometimes refereed to as cyberpathyn or Technopathy.

OR

Stuff just happens for no known reason.