Marlin 2.0.5.3 Configuration questions

Hi All,

I am migrating from Marlin 2.0.2 to 2.0.5.3. At the same time I am adding a Z Probe and the bed leveling. I went through and confirmed it would compile prior to installing on my machine.

I compiled and uploaded to my machine and on the main screen is ERR: EEPROM Version.

Anyone know how to fix it? FOUND this fix for EEPROM ERR... used M502 and M500 then M501 that worked

Also is there a menu item to run the Bed Leveling from the LCD?

otherwise things seem OK so far...

Edited 1 time(s). Last edit at 05/21/2020 08:38AM by jdebuhr.

DOH!!

Found it all

If I would have looked in the motion menu, not Configuration

Sorry

Hi,
Which Arduino IDE is used to compile this Marlin version? I use 1.9.0 Beta and 1.8.12 and Arduino DUE- Board
I get the error message (with every IDE):

arm-none-eabi-gcc: error: CreateProcess: No such file or Directory

exit status 1
Fehler beim Kompilieren für das Board Arduino Due (Programming Port).

Thanks for your help...

I used Arduino IDE 1.8.10

I still have not had time to mess with Platform IO yet

OK, I try IDE 1.8.10...
EDIT:
Error Message again…
I try Visual Studio. 3 hours later: It works fine!

Edited 2 time(s). Last edit at 05/24/2020 12:28PM by Laser.