Alright... So I ordered the RAMBo adapter from Seemecnc for the Reprap Discount Smart LCD. I went through their guide on how to make the LCD work and nothing. The screen turns on but says absolutely nothing. I am running Rambo V1.1 board, Marlin V1, and as stated above the Reprap Discount Smart LCD. I even looked into the adjustments for the RAMPS board. There is not clear cut way so i set myby RLOPrint - Reprappers
Uncle_Bob, My nozzle size is 0.35mm J-head hotend Layer height 0.20 Nozzle width from slic3r is also 0.35 I will attempt to change the setting in slic3r fill patterns to see what occurs. I may also upload a file showing my design and looking for a solution. I am attempting to print a "tube" or "pipe" running through a 25mmx50mmx10mm design. Anky advice beyond changing the fill settings would bby RLOPrint - Reprappers
Ok I have been using my MendelMax 1.5+ with Marlin enabled RAMBo electronics. I am using Slic3r/Repetier Host for software. I have been printing a few different designs that are basically blocks of plastic with a "pipe" or "tube" of empty space running through the design. Usually the design has a height of 1cm with a tube of 2mm Diameter. I tried to print a design with a 1mm diameter tube and wheby RLOPrint - Reprappers
If the bore is too small for a 3.175mm filament, is there a possibility that a 2.38mm filament could work in a 3mm Hot end?by RLOPrint - General
I am currently using a J-Head Mk V-BV 3mm hot end. I want to start printing with Polypropylene, but the only companies in the U.S. that carry that material generally carry it in 1/8in or roughly 3.175mm. My question is if that is this hot end able to handle this type of dimension successfully? Thank you in advance!by RLOPrint - General
Does anyone know where to find 1.75 PP filament? Thank you!by RLOPrint - Reprappers
Attached is my Marlin firmware file Currently running RAMBo electronics on a Prusa Mendel. All motors were operational for the last few days. No major changes made to anything. Z axis motors just stopped working. The motors vibrate and make a high pitch sound but refuse to fully turn. Tried in Ponterface and Repetier Host. In Ponterface they just vibrate but do not move. In Repetier the motors mby RLOPrint - Reprappers