would like to know how the Bulldog XL reliability is? cant really find any reviews on this extruder. thinking about replacing my current Greg's Hinged extruder. current extruder seems to give to many problems, hobbed bolt eating the filament. tried new rolls, different tension. not sure the hobbed bolt is getting dull. thanks for any input on the Bulldog XLby nefiwashere - General
Try hair spray. I have my bed @70. Nozzle at 225. Used to have hexagon hot end and never had an issue with pla. Only with abs lifting. Now I have the Prometheus hotend and I am having some trouble. I have to make sure my bed is sticky or the pla will lift. Buy I think it has to do with how I have the hotend setup. With Prometheus I feel that I have to turn down the heat on the nozzle to 200 buby nefiwashere - Printing
still having issue see pic. going to try printing an older file i was attempting with my hexagon head before i switched to the Prometheus. so far its about 5mm in height and no nozzle drag. currently printing at .3 layer height. gcode was from cura and .3 layer height so far no issue. gcode from cura and slic3r at .1 layer height i get nozzle drag and melting of the print. when the nozzle isby nefiwashere - Printing
I think there consistent. I printed with the hex head at .3 with good results. Hex head at .1 got OK results but the issue was heat from hex head. Think I might be over extruding. How can I fix that in cura? Going to try using slic3r and see what results I get...just have to set it up for auto bed levelingby nefiwashere - Printing
Start gcode in cura. not sure if there us something there that might be causing an issue ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} M190 S70 ;Uncomment to add your own bed temperature line G21 ;metric vaby nefiwashere - Printing
have the new Prometheus extruder. have auto bed leveling setup but getting hot end dragging on the print see vid Videoby nefiwashere - Printing
Having a problem with my prints. Have a makerfarm i3v with auto bed leveling. Have updated to current marlin firmware to use auto bed leveling. I have always printed at .3 and wanted to print at .1 res See picture of Print to see issue...printing at .1 res Nozzle @ 220 have to double check. Bed. @ 70by nefiwashere - Printing
got it figured out gcode in cura ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} M190 S70 ;Uncomment to add your own bed temperature line G21 ;metric values G28 ;home all G29 ;auto leveby nefiwashere - General
need some help got everything setup for aut bed leveling but how do i implement it into cura when i try to print its printing in the air. instead of offsetting the z for the nozzle thanks for the help cura gcode ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amountby nefiwashere - General
Is anybody using marlin on there 10" i3v? I want to add auto bed leveling but I have been informed that marlin 1.4 might cause issue with i3vby nefiwashere - Firmware - experimental, borrowed, and future
it was the firmware. it came with the 8" in version and i have the 10". once i updated it all was good.by nefiwashere - Printing
Having an issue where my printed part is nor the same as the stl model. I have been able to print successfully several times but there are certain larger parts that I try to print and they come out malformed. The part that is printing will print fine but just on one specific side is where the issue happens. Rest of part prints fine. I have changed the orientation of the part on the print bed anby nefiwashere - Printing