I believe David keeps it quite up to date with RRFby SleepyPrince - Duet
Hi David, just to let you know my homing problem has been resolved. But I didn't spend too much time figuring out what the actual problem was. I re-downloaded the firmware, up the motor current and set the speed lower all at the same time. only thing I know is that the speed wasn't the problem since I set it back up to 2000 there wasn't any jam.by SleepyPrince - Duet
Have all the specs of the pre-order boards been finalised? Or there may still be a change in the wifi module?by SleepyPrince - Duet
Hi David, I am having problem with 1.14 on my Duet 0.8.5 delta, once I hit home all The carriages move to the top and reach the endstops twice as expected but then the motor will make a high pitch noise like it's stuck or something and the Duet will disconnect need to do a power cycle to reconnect to it. I tried running the homedelta.g 1 line at a time It's the line: G1 Z-5 F2000 ; down a fewby SleepyPrince - Duet
As long as you can get the B value for the thermistor and use M143 to set the maximum temperature I don't see why the Duet can't handle itby SleepyPrince - Duet
Chris, thanks for all the good work. I only modified the Windows scripts so that no error comes out while compiling I am not sure if it works without any problem or not on actually machines.by SleepyPrince - Duet
A while ago I heard that it was planned to have a function to run macro when the extruder endstop is triggered. Has it been implemented yet? I am planning to add some sort of filament sensor to the Duetby SleepyPrince - Duet
Thanks dc42 and chrishamm for the RRF and DWC I see that you two have been merging each others' work/changes in the recent releases What are the main differences between the 2 branches now?by SleepyPrince - Duet
Hey chrishamm I tried to compile RRF in Windows 10 but is having problem. I modified the powershell script to include the correct paths (e.g. lwip) It started to compile but when linking it shows such error LD RepRapFirmware.elf P:\3dprinting\firmware\Duet\RepRapFirmware-ch\Release\obj\ethernet_sam.c.o: In function `start_ethernet': C:\Users\Jackal\AppData\Local\Arduino15\packages\RepRapby SleepyPrince - Duet
Thanks for the contribution! Love the music partby SleepyPrince - Duet
I am interested in incorperating the Flexidrive into my next Kossel. However, I am planning to use balls and magnets for the arms (and end effector) and probably using a E3D or Pico Hot-end. I am a bit confused on what is included in Flexidrive package and what I will need to design / purchase if the included parts don't fit my needs.by SleepyPrince - General