Quotethosmos Quoteiknownothing Same issue here. Have been struggling for a two weeks trying to figure out what's been happening. I've been doing the same thing, taking apart the extruder to get to the jam. I even tried letting the heater block hang without the heat sink at 240°, but I still couldn't get it cleared. I ended up having to take apart the nozzle, heater block and M6 collar and usiby iknownothing - Delta Machines
Quotemeq123 Quotethosmos I think its biggest downsides are: 1. incorrect default configuration settings in their firmware - especially INVERT_X_DIR, INVERT_Y_DIR, INVERT_Z_DIR set to true which caused my printhead to slam and scrape across the printbed on first powerup as it tried to home for the first time. 2. incorrect details in the assembly manual - thermistors needed to plug into differentby iknownothing - Delta Machines
Quotethosmos Quotemeq123 [email protected] QuoteXYrZbest The stock nozzle that came with my kit has been clogging on every print. I am thinking I should replace it with one of these thoughts? Same problem here. I am looking into getting a hot end with a sleeve to see if it will work any better (at all I should say). I have verified my temperature, checked my extruder feed and haveby iknownothing - Delta Machines
Sorry again.by iknownothing - Delta Machines
Deleted. Double post.by iknownothing - Delta Machines
Tried many SD cards 512M, 4/8/16/32GB. The 16GB did not work at first. Once I tried an 8GB, most of the rest of the SD cards worked.by iknownothing - General
Tried many SD cards 512M, 4/8/16/32GB. The 16GB did not work at first. Once I tried an 8GB, most of the rest of the SD cards worked.by iknownothing - Reprappers
I don't think this is normal behavior. Info screen shows when 'Card inserted' and 'Card removed' so that part is recognized. But once you go to the Main menu, the last menu item says No Card.by iknownothing - Reprappers
PinGish, Did you ever find a fix for this. I'm having the same issue. Or did anyone else figure out how to fix this? Thanks!by iknownothing - General