Hi thanks for your reply. The Y axis is going in the right direction to trigger the min end-stop. I did notice that I had to change the end-stop setting for X to opposite side and direction of X as well. I did nothing to Y axis. I wonder f that has something to do with it?by Jaguars - Printing
Hi, I have a frustrating problem. When I now try to autohome, autohoming does not go to the center of the build plate. It tests the X enstop twice as before, but now it only touches the Y endstop once and then there is no movement on the Y axis after that. It then only prints along the front edge of the build plate where it had stopped after triggering the Y endstop the once. I can move the buby Jaguars - Printing
Hi, I have an MKS GEN L Mainboard and a TFT32 Touchscreen, and I have never used the Marlin software on a touch screen. Are there any videos or guides showing how to use/operate a Marlin printer from a Touchscreen? Have a great week. Mby Jaguars - General
Hi, yes, lcd on correctly. It flashes up but nothing usable on it. I have contacted tronxy but it appears it is their board and no firmware. Only a .gcode file to run first to get it to run, which is what I am trying to load. What is the best hardware to replace it all with please? I am at the point that just replacing the tronxy board would be the best thing to do. I would appreciate help. Tby Jaguars - General
I have taken some pics of the board when it is powered up. it used to have 2 lights on it when it was switched on and it played music. Now only one light comes on now, no music and the lcd touchscreen doesn't come on. I have added the pic for the X5SA with the 2 lights (which i still can't connect to) and it shows the position of the two lights and they are on and it plays music on powerup. Whby Jaguars - General
Ok, what software do I need to connect to the board then please? I have tried with repetier host and no connection. Thanks.by Jaguars - General
Thanks. What firmware does the X3SA use please amd where can I get it? Thanks. Mby Jaguars - General
Yes it shows in device manager as Com5. On windows 10. Have opened repetier-host and it shows as Com5. Doesn't work. X5SA lights up and plays music as it does when powered but that is it. Tried different baud rates but no different. No board information showing either. Am I missing a port driver or something please? Thanks for your help.by Jaguars - General
Firmware attached They also supplied Repetier host software with it, but I have been unable to connect to the board with Repetier. Please help. Alternatively, what is the best hardware to replace all of this on this Tronxy printer if I wanted to please? Thanks for you help. Mby Jaguars - General
I have the original X3SA firmware. I also have Arduino version. Why?by Jaguars - General
Thanks. Problem is I can't get the computer to recognise the board and run the firmware. I need the printer lcd touch screen to do it manually but it is remaining blank until I can update the firmware. So what can I do please? How do I connect Arduino or other software to the board when I can't find stm32 as a choice please? Thanks for your time and help. Mby Jaguars - General
Hi, Help Needed with my Tronxy X3SA with LCD touch screen Firmware and/or Bootloader. I have a big issue with this printer. I suddenly came to a standstill after switching it off, and then went back and switched it on and no sound and no funky Tronxy music. I somewhat decided it is firmware, but without the screen, i can't load a firmware file and run it. I have looked on different sites etcby Jaguars - General