For "corner ringing" see here You can see it on last pic clearly. BTW with that high quality you may scale down the model to print "micro" versionby karabas - Mendel90
Looks excellent! What slicer do you use? And what bed? Сan you post macro pic of surface? The only issue I see is "ringing" but this is common problem...by karabas - Mendel90
Tight X belt. You see that X movement does not start immediatly after changing direction. I suppose horisontal is X on your pics.by karabas - General
Ok Thank you What is the purpose of two separate "corners" in x_motor_bracket.stl ?by karabas - Mendel90
It is still not clear for me what diameter of theraded rods are used and what is preferable. STLs in dibond folder, which I believe the final version is, are for 8mm threaded rod, but STLs in mendel folder are for 6mm. So I am a bit confused what is better to print. Couplers seem to be all 6mm...by karabas - Mendel90
Where are pics showing higher beltless quality? Pics on site do not show it. I see repeative structures on vertical walls and wavy traces after head direction changes.by karabas - General
Есть же нормальный форум в тч для решения проблем Робофорум С моей точки зрения это самый активный и посещамый ресурс по теме.by karabas - Russia RepRap User Group
Elidor, 200mm/s? what plastic and filament diameter?by karabas - General
Today new version of excellent slicer is released. See its forum. I wonder what settings to max quality do you prefer? Share your ini files pleaseby karabas - Mendel90
When I am thinking about changing sizes of the machine and won't use two Z-steppers but only one there is a problem how to make loop belt. I have a spool of T5 white belt from reprapworld and look for a way to connect belt ends to make a loop. There are several metal wires inside the belt.by karabas - General
What about warping? The same as ABS or better?by karabas - General
You can use glue layer such as on some tapes and sticking foams. I had a success with ABS and such a layer that I found in old scanner cover. I tried a foam based black shild from the cover - without success. But after removing it I found that glue remained on bed works well (tried on cold bed)by karabas - General
1 Печать деталей из ABS PLA пластика в Севастополе. Доставка по Украине любой службой доставки. 2 Сборка принтера/изготовление кита под заказ на базе arduino 2560+ramps1.4 Предпочитаемые модели SeeMeCNC H1, mendel90 3 Пластик для 3д принтера. А так же принимаю заказы на большие объёмы пластика. т(050)5322213by karabas - Russia RepRap User Group
Не надо. Доставка оплачивается сразу до указанного адреса при покупке.by karabas - Russia RepRap User Group
возьми кусок 10мм акрила - есть в любой лазерной резке. Он ещё покрыт защитной плёнкой слегка ошкурь и обезжиривай ацетоном - деталь держится зубами снимаю детали упирая их в край стола (плиту вертикально) ударом по торцу плиты Деталь фигово прилипает если начинать печать на большой скорости. Может отлипнуть в процессе если энергично охлаждать кулером Да и плиту не греть ни в коем случае - холоby karabas - Russia RepRap User Group
Ebay link to seller Is it good plastic? Did anybody tryed it? Yura, Ukraineby karabas - Obecné