If i set my heat bed to 110. Should i keep it at this for the full print? Or does it need to be lowered after first layer? Or what are you guys having success with?by pushthatbolder - Printing
I found it was the fault of a faulty limit switch. I changed the lead and now its fine. Yes. All 3 jumpers are connectedby pushthatbolder - General
found it in config file. couldn't see before, but now i doby pushthatbolder - Printing
i changed it in g code from generated by Slic3r 1.1.6 on 2014-08-28 at 23:58:55 ; perimeters extrusion width = 0.50mm ; infill extrusion width = 0.70mm ; solid infill extrusion width = 0.70mm ; top infill extrusion width = 0.70mm G21 ; set units to millimeters M107 M104 S200 ; set temperature G28 ; home all axes G1 Z5 F5000 ; lift nozzle M109 S200 ; wait for temperature to be reached G90 ;by pushthatbolder - Printing
i am printing with ABS i set heat bed to 110 and extruder to 245 when i click print it defaults the temp to 200 it has a large delay to print because it is waiting to get to this temp anybody know a solution?by pushthatbolder - Printing
dust, or Jinx... any thoughts?by pushthatbolder - General
what do i set line #480 to? from #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) to #define HOMING_FEEDRATE {???????????????????????} // set the homing speeds (mm/min) what do you recommend?by pushthatbolder - General
aaaah!by pushthatbolder - General
on my stepper motor the motor specified a.b.c.d and Ramps called for a1,a2,b1,b2 format , with my stepper the pairs were a&c and c&d and also a=a1 b=b1 c= a2 and d=b2 so looking at your motor the 1st wire goes with the 3rd and the 2nd with the 4th. also you may need to reverse polarity instead of 2b-2a-1a-1b (specified on Ramps) you make it 1b-1a-2a-2b (reversed of original)by pushthatbolder - General
Using ramps1.4 and mega2560 for my i3-rework. Also using full graphics controller and 30a power supplyby pushthatbolder - General
After Connecting diodes into the d1 and d2 position. It ahould be a plug and play unit with my lcdscreen and sd reader? If the diode has a silver band dictating the cathode. On the diagram. Which way does the diode face. Towards arrow with silver band at bottom of triangle?; Which way does diode need to face? And i should install diode in bith d1 and d2? Does anyone have pictures of installeby pushthatbolder - General
I am using the following #define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,4000,600} // default steps per unit for prusa i3 rework 680 < 850 < 1060 #define DEFAULT_MAX_FEEDRATE {500, 500, 2, 25} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {2000,2000,20,1000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older veby pushthatbolder - General
It's OK, I learned alot... I would of been printing Hours before, but hey, we live and learn. firstly i had the change all the stepper motor wiring around, thank god for DuPont Connector First print was Horrible, it was a 20mm cube, although some of the detail was Awesome, better than printed parts I bought from ebay Forgot to spray hair spray on glass. z-axis got shunted off, as i started priby pushthatbolder - General
extruder working, y axis working, z axis working, x axis working... went to print 20mm cube and whole machine started to squeeeeeEEEEElLLLby pushthatbolder - General
motors are working except for extruderby pushthatbolder - General
z axis are not running in sync.by pushthatbolder - General
nevermindby pushthatbolder - General
hello guys, error message ConfigurationStore.cpp: In function 'void Config_ResetDefault()': ConfigurationStore.cpp:302: error: 'DEFAULT_LCD_CONTRAST' was not declared in this scopeby pushthatbolder - General
could we make extruder fan come from D9 ????by pushthatbolder - General
done, what now?by pushthatbolder - General
it has placed itself back into sketch directory. which is great. if i edit it now, it will save.by pushthatbolder - General
i hit it with a hammer, tried to import pins.h, it deleted pins.h from directory redownloaded pins.h and extracted only this to desktop open pins.h (desktopversion) into arduino IDE asked if i wanted replace pins.h that was currently there i said YES! brings me to pins.h if i click away, the pins.h file is lost, but i think i am here, what do i need to edit now?? this?? #if MOTHERBOAby pushthatbolder - General
I downloaded again. from github. still nothingby pushthatbolder - General
i shouldnt have to, but it says it is there but it is not there!!! the only reference i can find is on the first marlin file /* -*- c++ -*- */ /* Reprap firmware based on Sprinter and grbl. Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by theby pushthatbolder - General
i started a new sketch, pressed add file and selected a copy of pins.h... did it the first time and it was blank, nothing to see, did it the second time and it said would i like to replace the other pins.h see,, its invisibleby pushthatbolder - General
if that list had a toggle option, we could see more files.by pushthatbolder - General
yes, coffee, shower, fetal positionby pushthatbolder - General