I'm using a glass bed, so I'm not really sure if it can warp or not. Also, I didn't found anything related with "The digital dentist" printer. Nonetheless, I'm going to give a try to the dial gauge, seems like I can clarify some doubts easily. I'm using some paper clamps to hold the glass to the heated bed. I've found out that a lot of people use some sort of adhesion tape. Would you recommendby ratuspro - Printing
Thank you guys, but since I'm using a glass bed the plate warping isn't really a problem right? And ggherbaz, what do you mean with: "a 3 point leveling or a stiffer Y carriage and bed." I'm using ABL with bilinear 4 point grid.by ratuspro - Printing
I'm also having some problems with auto bed leveling and RC8. Did you solve your problem?by ratuspro - Firmware - Marlin
mjoyce, Were you able to fix your problem? I'm having the same issue. Thanksby ratuspro - Firmware - Marlin
Quoteobewan QuoteAfter the first 3/4 layers, the nozzle starts to bump on the previous layer This could allso be incorrect setting of Zsteps/mm. tell the printer to move Z by 100mm and measure that it does actually move 100. I've calibrated it several times and z-steps are well configured.by ratuspro - Printing
Thanks for the fast reply @will1384. Your answer was very informative and detailed, however, I've already tried both of your suggestions. I think that you might not understand the issue properly, maybe I wasn't very clear. Regarding the bed leveling, I'm using a probe - BL-Touch - to do some auto bed leveling (ABL). After issuing the G28 to home and G29 to ABL, seems like the firmware doesn't cby ratuspro - Printing
Hello, Last year I built a Prusa i3, the reworked version, and now I'm making some improvements. I bought a E3D Lite6 and a Titan extruder and the printing quality improved a lot. Then, I bought a BL-Touch for the auto bed leveling because I was tired of manually leveling the heated bed every time. And then, some problems started to appear. After configuring the marlin firmware, the bed levelingby ratuspro - Printing
Hello Guys, I've build a 3D Printer similar to the Printrbot simple. It uses a Ramps 1.4, Nema 17 and all the usual stuff. You can see how it looked like after i assembly. Its footprint was not that big - 370*350*360 - similar to that the print volume is around 150*150*150. Either way I've designed it and build it from scratch but when I assemble it the base and the "tower"'s sides bend like heby ratuspro - Laser Cutter Working Group