Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 13 of 13
Quotejay_s
well you've got something wrong somewhere are your board.txt file is not being loaded.
Can you show the contents of your sd card?
what should be the content of the sd card ?? i dont see anything as a package for old people like me and i m reading the last 3 days to get this working
thanks
by
kostasbmw
-
Firmware - experimental, borrowed, and future
i think i m going to start from the begining
what files should i have on the sd card ??
i guess i dont have to flash again the board ...the blue light blinks when connect
but from what i understand i have a problem with my board so it does nt connect through wifi but i have a serial connection somehow with pronterface
is there a package to download and put it on the card???
i would nt ask s
by
kostasbmw
-
Firmware - experimental, borrowed, and future
Quotejay_s
well you've got something wrong somewhere are your board.txt file is not being loaded.
Can you show the contents of your sd card?[/quote
gcodes
macros
sys
www
firmware
duetdriverfiles
by
kostasbmw
-
Firmware - experimental, borrowed, and future
Quotegloomyandy
Also please note that there is currently no support for the 2130 SPI interface. So you will have no way of setting current etc. via software. You will also probably need to set the number of smart drivers to 0 to stop the firmware trying to talk to them via the UART interface.
ok i have the 2209s in the side to install but the communication should be ok apart of the drivers....or
by
kostasbmw
-
Firmware - experimental, borrowed, and future
ok here we are
SENDING:M122 P200
== Configurable Board.txt Settings ==
lpc.board = generic
leds.diagnostic = NoPin
stepper.enablePins = { NoPin NoPin NoPin NoPin NoPin }
stepper.stepPins = { NoPin NoPin NoPin NoPin NoPin }
stepper.directionPins = { NoPin NoPin NoPin NoPin NoPin }
stepper.digipotFactor = 0.00
stepper.TmcUartPins = { NoPin NoPin NoPin NoPin NoPin }
stepper.numSmartDrivers = 0
heat.
by
kostasbmw
-
Firmware - experimental, borrowed, and future
// Board Hardware configuration file for SKR v1.3
// generated by RepRapFirmware Configuration Tool (LPC Version) v2
// on Thu May 07 2020 07:31:52 GMT+0200 (Mitteleuropäische Sommerzeit)
//Note: Each line should be less than 120 characters.
// : Unwanted options can be commented out or set to NoPin. Lines commented out will get default values
// : for pins the default is NoPin.
// : V
by
kostasbmw
-
Firmware - experimental, borrowed, and future
ok the adapter is the one I got from tindie ,supposed to have the server installed but I flashed it again through the USB port with the duetserverwifi.bin and the I connected to the sky 1.4 with the exp1 and exp2 cables
when I switch the power on I see only a blue flash from the adapter board
then I try to connect through yat terminal software ...no luck
I tried pronterface and I get the m122 as
by
kostasbmw
-
Firmware - experimental, borrowed, and future
no way i can connect
my m122
SENDING:M122
=== Diagnostics ===
RepRapFirmware for LPC176x based Boards (biquskr_1.4) version 3.1.1 running on LPC176x at 100Mhz
Used output buffers: 1 of 16 (1 max)
=== RTOS ===
Static ram: 3876
Dynamic Memory (RTOS Heap 5): 3296 free, 3272 never used
Exception stack ram used: 304
Never used ram: 380
Tasks: NETWORK(ready,1992) HEAT(blocked,1360) MAIN(running,1084)
by
kostasbmw
-
Firmware - experimental, borrowed, and future
Quotewamonite
Yep, that was it. Enabling endstop pullups and inverting endstop logic for my TMC2130s fixed my sensorless homing issues. This would have worked in 1.1.8 (although I was having other TMC2130 issues) and changed in bugfix-1.1.x (at 53757444). Thanks for listening
did you enable all endstop pullups???
and when you say inverted the endstop logic..which ones ?? all or just x and y ??
by
kostasbmw
-
Firmware - Marlin
i just installed tmc2130 and i m trying to understand when i use sensorless homing is the section endstops in configuration.h need to be commented or not ??
my printer is a small hypercube (first build) and i m trying to understand how to setup marlin......
any help will be appreciated
by
kostasbmw
-
General