I had same problem, try to change the BaudRate on preferences. On my case, from 19200 to 9600 and then work fine.by gigimax - Sanguino(lolu)
Yep, I guess you're right...bootloader works...maybe...because i put 328 chip from ONE to 2009 but i can't upload sketch... IDE program hang with this error : avrdude: stk500_getsync(): not in sync: resp=0x00 avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51 i check COM connection and type arduino on IDE program ...all ok... i come back to working solutions but duemilanove withby gigimax - Firmware - experimental, borrowed, and future
Thanks Traumflug for reply, I think to try for update the bootloader of ONE with Arduino 2009 ISP mode. Probably influenced even when the bootloader would load Teacup firmware on the arduino ONE .. worked almost everything except the extruder ..by gigimax - Firmware - experimental, borrowed, and future
I try to move my working firmware from arduino duemilanove with ATimega 168 to arduino UNO with ATmega 328 but, on arduino 2009 all work fine , on arduino UNO stepper extruder not work... why ? Arduino UNO with 328 have only more ram... or have other differences that i don't know?by gigimax - Firmware - experimental, borrowed, and future
are you solve ? what is your configuration ?by gigimax - RepRap Host
Hi , have you solve your problem ? i have similar problem, only that on my window debug the temp is ok.. (see attachment) i discovery that with a old firmware (gcode interpreter no 5D) host display the temperature, with 5D teacup firmware only on the window debug. Darwin Arduino UNO w ATi328 Gen 2 electronics for axis motor stepper Wade Extruder with motor stepper SMD A4988 for extruder Optoby gigimax - RepRap Host
Hi reprapers, I have teacup firmware installed on Arduino UNO with 328 and i use host software 64bit ver. 20100719. On debug window temp is ok, but on the host is 000 ... i try with replicatorG and work correctly. I have try to change "T: " string position on many other variants with spaces on file temp.c (section "send temperatures to host") whitout success. Anyone have same problem ? Thank'sby gigimax - RepRap Host
mouwycom Wrote: ------------------------------------------------------- > I found the solution! > I've activate Lash in Skeinforge. X Backlash (mm): > 0.2 and Y Backlash (mm): 0.4 I have the same problem , but in the java software i don't find the Lash settings...by gigimax - Reprappers
Hi to all reprappers, I have a darwin reprap with arduino generation 2 electronics. I'm looking for a plastic parts, stepper motor and pcb like Extruder version 2.0. Thank's Maxby gigimax - Wanted
Hi to all reprappers, i have a old project of darwin reprap with arduino generation 2 electronics. My extruder have a big problem with dc motor that have a low force for press abs to hot barrel. So, i'm looking for a plastic parts, stepper motor and pcb to drive this for upgrade to Extruder 2.0. (i can use my hot barrel with PFTE insulator) thank's for reply Maxby gigimax - For Sale