Building my i3 today, but with my delta, I only get prints like that when the nozzle cools off too much by the fan or dust has partially clogged the extruder. But you said you cleaned up everything. I would try the print again but watch the hotend temps.by cwnannwn - Prusa i3 and variants
I will try to help, but it looks really messed up. First, you need to make sure that you have the right measurements in. Measure the smooth rod, diagonal rod, carriage, bed, effector, ....everything. Make sure the numbers match. Google each item to find what it is, and get as close as you can. Chances are, that they have the wrong number. Secondly, make sure the bed is centered. The kit I gby cwnannwn - Delta Machines
Short answer is no. Long answer is no unless you want to hack the program. Sorry.by cwnannwn - Delta Machines
When you open the arduino code to push it to the arduino, do you notice anything like Marlin or udelta? If you have marlin, you open arduino, and you see a little down triangle in the top right. Click on it, and you will find marlin files. where did you get the code for the arduino. Because it will determine how to set up the height.by cwnannwn - Delta Machines
Docpayce thank you. I tightened up all the nuts and re measured everything. Now getting 20mm prints +/-.01mm. It does take time but Folger tech makes a good printer. Wondering if the 5t is going to be this good.by cwnannwn - Delta Machines
So got everything up and running. Trying to figure out the best way to adjust XY on the Delta. The 20mm cube is coming out 20.40 on the x and 20.30on the y. Z is dead on at 20. I looked around found several idea some of them saying they are out of date. So what is the best way to adjust XY for this printer?by cwnannwn - Delta Machines
I ordered mine last Thursday, it was shipped the next day. Fedex is taking their own sweet time with it, but it should be here tomorrow. Just wanted to chime in that they seem to have caught up with shipping. I did get like 4 shipping notices.by cwnannwn - Delta Machines