I agree with Ralph Ralph.Hilton [ PM ] Re: Best Delta DIY kit new August 28, 2015 08:16AM Registered: 1 year ago Posts: 409by Ace67aod - Delta Machines
Do you know of any firmware that actually make calculations and corrections that still supports the Panel One display for the Mini kossel from T3DP3D?by Ace67aod - Delta Machines
So would any firmware work with your IR probe with my RAMPS 1.4 and mega?by Ace67aod - Delta Machines
I was talking about the PanelDue Touch display (https://www.think3dprint3d.com/Electronics/Displays)by Ace67aod - Delta Machines
i am currently not using any auto calibration. i have a kit from T3DP3D it prints smaller prints fine when i do larger prints i can see my bed is not level. My problem with the FSR is getting the firmware that works with auto leveling and my panel one LCD. I need to probably try different firmware....however i'm not the greatest with software. I really like the duet + Due combo with the IR probeby Ace67aod - Delta Machines
Hello DC42, I am very interested in the Differential IR probe for auto calibration due to the many issues with FSR and my mechanical probe. However I have had issues in the past finding correct firmware that uses auto calibration and my panel one LCD... Would i need to upgrade my electronics to duet and the panel due to take full advantage of this system?by Ace67aod - Delta Machines
Heated bed was the issue No heat needed for PLA in most situations at least for me it seems like thanks for your help!by Ace67aod - Delta Machines
i did the Marlin correction as you suggested and im still having the same issue lifting corners on my prints could the heated bed with PLA be the cause of this i use hairspray on a glass with no tape at 70 degrees Cby Ace67aod - Delta Machines
I am having a similar issue to this with reference to your posted image DragoslaV, My L position seems to be what is my problem how would one go about fixing this could this be a result of my paper XYZO calibration? Because my paper snags correctly for all position however my X position squeezes the paper harder than all my other position would this fraction of a millimeter be whats giving me myby Ace67aod - Delta Machines
If i have an attached panel one display that lets me control the RAMPS board directly would i just set the extruder Vmax from 800 to 500?? or does this value mean something else?by Ace67aod - Delta Machines
Tim thanks i figured so after some more research and thanks, i Use the arduino mega + RAMP 1.4 Kit from think3dprint3d! My hope is not to have to adjust the setting maually because it would be difficult to tune versus just setting the settings in marlin where i know it would be correct im just looking for the line of code in marlin that sets the power for extruder or motors im not sure if this isby Ace67aod - Delta Machines
Thanks for your help DC, Is this a slicer setting or is this a change in marlin? I suspect its a marlin change and I think I found the correct line of code to change but im not sure....From my understanding this line of code controls the PWM's on the stepper motor divers digitally? #define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} would i just change the corrisponding extruder motor down toby Ace67aod - Delta Machines
So I have a working mini kossel 3D printer, however I am running into some issues: The hopped geared feeding filiment to the hotend is grinding away my filiment sometimes as it is feeding through to the hotend it seems very inconsistant it happens usually at the start of the print or at the end. I have been playing with slicer settings mainly retract speed and length but for some reason nothingby Ace67aod - Delta Machines
I recently switched my marlin to RichCattell's so that i could implement autobed leveling with my force sensors...I have gotten the bed to level however i lost the function of my panel one LCD (i know its the marlin because when i use my original fuction returns) Is there another file i need to edit or change to make sure marlin knows im using a panel one?? Second my hotend will not heat up whenby Ace67aod - Firmware - mainstream and related support
Thanks i got the G30A to calibrate at .05 and got the setting stored.....now to try and heat up and print... lolby Ace67aod - Delta Machines
Is there anyway to edit Rich Cattell's marlin to reduce its tolerence from .03 to.05 my iteration level get really high and the G29 A command ends up making small changes forever do i just let it keep running or can i reduce the tolerance for a level bed see video above for more on this...by Ace67aod - Delta Machines
So I installed Force sensors inplace of my mechanical z probe for autoleveling on my mini kossel. Overall they seem to work loads better here is a link to a video showing the rig up and some Iterations my machine is running. seems to work we will see...by Ace67aod - Delta Machines
So I reloaded my defult software and the LCD function returns so the new firmware must have a different panel setting does anyone know what line in marlin lets you set what LCD panel you are using???by Ace67aod - Delta Machines
I recently changed firmware on my mini kossel from my defult marlin to RichCattell marlin. I have made all the nessasary changes to the marlin(i think) and have double checked the wires, and the contrast settings and everything looks okay however it is still not displaying any information just a blue light... Has anyone ran into this problem before when changing firmware? Could it be he uses a diby Ace67aod - Delta Machines
This is a way more complicated issue then i thought it was going to be however i really want to get an auto leveling system working and due to my Z probe dragging due to my tilt i think this might be a useful alternative and might involve some outside of the box thinking but here are some of the links i am using to put my FSR autoleveling system to work WITH a heated bed. Personally ive gone wiby Ace67aod - Delta Machines
nevermind i found a Post that helped BURIED in the back THANKS!by Ace67aod - Delta Machines
Hi all, I recently build a mini kossel and am having trouble getting my bed to level. It seems as though my heated bed is not mounted exactly parallel to the extrusion due to imperfections in the #D printed part. I see that the force sensors is a way to auto level your bed using the nozzel itself as the probe. However most of the examples i can find do not use a heated bed. Has anyone out thereby Ace67aod - Delta Machines
Hi M4vrick99 I am having a similar issue with my mini kossel that i recently just built. I manually calibrate due to issues with my auto leveling probe snagging and dragging on the print bed. I just cannot seem to get my bed level then it throws off larger prints just like in your picture...My kit was also from think3dprint3d before the upgrade.... have you found a reasonable solution or does fiby Ace67aod - Delta Machines