Hallo, ich hab folgendes Problem bei meinem Mendel90 Lasercut Nachbau: Die Achsen x, y funktionieren tadellos, ebenso Bettheizung, Extruder. Nur die beiden z Schrittmotore brummen laut wenn ich sie homen möchte. Möglicherweise hängt das Problem an der steps-Einstellung für die Z-Achse. Wenn ich die orig. Einstellung nehme kann ich homen, allerdings stimmen da ja die Wege nicht! Ich verwende 2 Zby manfred59 - Elektrik & Elektronik
Hello, I have a very strange problem. My Mendel90 kit is about 1 year old, when I switch on another power source in the room where the 3d printer works the printer looses the connection with Repetierhost, the printer stops and the current print must be restarted. I guess that the original 500 W PC power supply could be the problem. Could it be that perhaps a loose connection is the reason for theby manfred59 - Mendel90
@peter_xm Thank you for the link! Manfredby manfred59 - Mendel90
Hallo, ich hab ein ganz komisches Problem. Mein Mendel90 Bausatz etwa 1 Jahr alt, verliert sobald eine andere Stromquelle im Raum eingeschaltet wird, seine Verbindung mit z.B. Repetiert Host, d.h. der Drucker bleibt stehen und der laufende Druck muss von neuem gestartet werden. Konkretes Beispiel: Druck wurde gestartet alles läuft geplant, ich schalte das Licht in meiner Werkstatt ein - Connectioby manfred59 - Elektrik & Elektronik
Hi! I am building an Lasercut Mendel with E3Dv6 hotend and the frame from Think3dPrint3d. I did print all .stl with my 2013 Mendel. Most parts I bought from various sellers, also the GT2 pulley(16 tooth) and a Gt2 belt. Please where (in the config_h ??) I have to modify the values. I have downloaded the Marlin version Form github of T3P3, for Ramps 1.4 with arduino mega. Manfredby manfred59 - Mendel90
Hi, da ich bereits einen orig. Mendel90 als Bausatz für meine Schule gebaut, und diesen mit einer Dauerdruckplatte getuned habe, würde ich mir gerne einen „privaten“ 3D Drucker zulegen(Mendel90 with enclosure). Hab heute Sheetmetallplattenreste in 4mm Stärke ergattert und wollte gleich vom Mendel enclosure Projekt die dxf files von hier herunterladen und anpassen, aber ich kann die nach dem speicby manfred59 - Allgemeines
Hi, It is working now!!! What I have done: Starting the new pronterface from March 2014 and settiing the Baud Rate to 250000! Manfredby manfred59 - Mendel90
Hi, I have deinstalled python software completly and tried to connect with pronterface. QuoteConnecting... áqXñ:&˜J=a`H.N6‹Hm@ˆ´á]ŠöJC>£ÜhnJQ/ Quote Traceback (most recent call last): File "wx\_core.pyc", line 14669, in File "wx\_controls.pyc", line 1850, in AppendText File "encodings\cp1252.pyc", line 15, in decode UnicodeDecodeError: 'charmap' codec can't decode byte 0x90 in posby manfred59 - Mendel90
Hi, I did not make any changes, but today my pronterface does not connect anymore to my Mendel90 Here is the log: QuoteTraceback (most recent call last): File "wx\_core.pyc", line 14669, in File "wx\_controls.pyc", line 1850, in AppendText File "encodings\cp1252.pyc", line 15, in decode UnicodeDecodeError: 'charmap' codec can't decode byte 0x90 in position 9: character maps to What couldby manfred59 - Mendel90
Hallo Boris! Ich hatte bereits versucht mit netfab basic zu reparieren, aber ohne Erfolg. Kann es sein, dass die Academic Version von SolidEdge ST5 fehlerhafte stl's erstellt? Soll die stl als ascii oder normal als stl abgespeichert werden? Habe gerade eine oben offene Schachtel 30x40x20 mm mit SE konstruiert als stl gespeichert. Auch die konnte ich nicht slicen. Muss ich im Slic3r Programm etwasby manfred59 - Software
Hallo liebe Forenmitglieder! Ich neu hier , habe einen Mendel90 seit einer Woche erfolgreich in Betrieb, habe aber bis jetzt nur fertige .stl mit Skeinforge gesliced und gedruckt, das hat bis jetzt super funktioniert. Für unseren Tag der offenen Tür habe ich einen Schlüsselanhänger mit SolidEdge bzw. auch mit Autodek Inventor erstellt, hab sie auch als .stl exportiert, aber weder mit slic3r nochby manfred59 - Software