Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 25 of 25
Sziasztok!
Elindítottunk egy csoportot a facebookon! Szerintem nap mint nap fellépünk oda és nagyon sokan tagjai vagyunk.
Ha szeretnétek megosztani kérdéseiteket/problémáitokat csatlakozzatok hozzánk !
FACEBOOK FÓRUM LINK
by
epiteszsrac21
-
Hungary RepRap User Group
Hello !
A Pronterface és a Slicer egy nagyon jól alkalmazható szoftver és jó választás! Ez mellé én javasolnám hogy töltsd le a CURA nevezetű szoftvert. Én kezdőknek ezt javasolnám ugyanis sokkal kevesebb a beállítás és térben is könnyebben el tudod helyezni a tárgyat. Nagyon jó lehetőségek vannak benne és folyamatosan fejlesztik a programot. Az ABS-el való nyomtatás igen igen nehézkes mert nag
by
epiteszsrac21
-
Hungary RepRap User Group
Sziasztok!
Elkészült weboldalunk! Cégünk várja azon érdeklődőket akiknek segítségre van szüksége 3D nyomtatás tekintetében. Több éves tapasztalattal rendelkezünk 3D nyomtatás területén. Továbbá vállaljuk 3D nyomtató kittek nyomatatását, meghibásodott nyomtatók szervizelését, tanácsadást.Bátran írjatok ide a fórumba ha kérdésetek van továbbá az alábbi e-mail címen elérhettek bennünket: ba
by
epiteszsrac21
-
Hungary RepRap User Group
Sziasztok !!
Eléggé csöndes ez a Fórum de hátha valaki találkozott már ezzel a Problémával.
Egy Rep-Rap Prusa Mendelem van Greg's Wade Extruder fejrésszel. Az lenne a problémám ,hogy állandó jelleggel bekoszolódik az extruder előtoló bordázott csavarnak a fogazata és így nem tudja húzni a szálat ergo elrontja a nyomatot egy ideig tökéletes és működik de egy pár nyomtatás után már van benne an
by
epiteszsrac21
-
Hungary RepRap User Group
Dear REp RAPERS!
I want to peint some object with a thin wall without finishing solid layers. I use Replicator-G printing program. Where can I turn off the last / finishing solid layers? Because I set up a zero into fill ratio so the object is already empty without infill. But when the printer finished the peremiter layers it always start to make the closing solid layers...
Please help !!
It s
by
epiteszsrac21
-
Printing
Thank you for your HELP !!
It solved my problem.
by
epiteszsrac21
-
Printing
Thanks for the quick answer!
So If I understand correctly For exemple I flip the X axis motor wiring and the X endstop put the another side. It's no matter which axes will be flipped? Or somehow it should be think out? because I think the Y axis move the correct way.
And please write me how could I input this file and where?
I write this line into a notepad and copy that script somewhere?
by
epiteszsrac21
-
Printing
Dear Rep Rapers !!!
I've got a MENDEL PRUSA. It works fine still i try to import an object from ( Archicad or Rhinoceros 3d ) The export works fine and I can open the *.stl files in Replicator-G. The preview window is show me the correct view which I want to hold in my hand after print but it seems like the printer somehow flip the objects. The exemple files which are inbuild the program are wor
by
epiteszsrac21
-
Printing
OK thanks!
I will try it today !!
by
epiteszsrac21
-
Printing
Ohh sorry!
So I try to write down correctly my problem .
Everything is OKay with the printer. When I puted together and print the first calibration 0.5mm wall it worked fine. But my Filament was out of stock and I ordered a new another type of fabric.
The new plastic is white 3mm PLA plastic
The old plastic which I used for the calibration print was transparent natural 3mm plastic.
My probl
by
epiteszsrac21
-
Printing
HEy R3pRap3rs!
I have a "litle" problem with my printer MENDE-PURSA. I bought a new pla filement and my printer isn't work with that. Before this I use transparent PLA natural filement( now white PLA ) that worked fine! And now I ordered an another filement and this doesn't work.
They offered temperature is 230 C° My print head can make this temperature but I think, I have some kind of problem
by
epiteszsrac21
-
Printing
Hy guys!!
I have a big problem with my RAMPS and Arduino mega 2560. I have got the same problem like your had. My Y axis stepper motor move only one direction. I measure the Voltage between GnD and DIR pin. It's constantly 0.00 V the other three Pololus work good. Today I check my ARDUINO with a blink Firmware ( BLINK FIRMWARE ) . My Y axis pololu's dir pin is connect to A7 connectro on ARDUINO
by
epiteszsrac21
-
Sanguino(lolu)
Hy Reprapers!
I have got a problem with my Y axis. I would like to try out something , but it has got to change the pins number in pins.h tab. I would like that my Y axis motor will work from E1 extruder slot because of the pins.
What kind of alterations could I make?? I tried to change simply the pin numbers but it didn't solve my problem.
Please help me!!
Bazsi
by
epiteszsrac21
-
RAMPS Electronics
Hey GUys ! I have a same problem with Y axis. I don't know how could I fix it. I don't know how the electronics are work.
I have an ARDUINO MEGA 2560. How can I disable JTAG? because My Y pololu's DIR pin is connected to A7 pin. Please someone let me know the stpes. Thanks a lot! I'm too sily for this .
Bazsi
by
epiteszsrac21
-
Sanguino(lolu)
THanks a lot VIktor! I found a topic :
I think i have a Same problem . The JTAG is enabled (factory default). And the JTAG is disabled pins 4-7. THis is why doesn't move the Y axis.
by
epiteszsrac21
-
RAMPS Electronics
Ohh realy? It's very good news so I search that topic . This problem is a big Mind fuck for me DDD. I hate this one.
by
epiteszsrac21
-
RAMPS Electronics
I Measure the voltage from pin 61 to GND, and you are right. The voltage didin't change. The other three pololus are working well. The voltage is changing betveen 0.00-5.00V so now I try that pololu in an another Slot. I hope only just the wiriing wrong or the software.
If in the software went wrong something I suppose it's somewhere around the Y_PIN configuration. Every configuration guide say
by
epiteszsrac21
-
RAMPS Electronics
And How could I check the Stepper driver pins? I found a part of sprinter firmware which one name is pins.h------- I found this there:
Arduino Mega pin assignment
*
****************************************************************************************/
#if MOTHERBOARD == 33
#define MOTHERBOARD 3
#define RAMPS_V_1_3
#endif
#if MOTHERBOARD == 3
#define KNOWN_BOARD 1
//////////////////FIX THIS/
by
epiteszsrac21
-
RAMPS Electronics
Ohh Most ez új információ ! Ezen a Max endstoppon megakadt a szemem. Lehetséges hogy igazad van mindjárt lecsekkolom. MOst az Y tengely motorját rádugtam az X-re így csodával határos módon működik a dolog mindkét irányban. Tehát a javaslatod az lenne hogy nézzem át újból az Endstopokat majd nyomjak egy olyan gombot hogy Home all? És utána elvileg kéne mennije igaz?
Még próbálgattam olyan lehe
by
epiteszsrac21
-
Hungary RepRap User Group
Sorry but I don't know what is CLK ? Today I tried to flip the Y axis's motor connection but it just caused that the Y direction changed.
I use Sprinter firmware
Arduino MEGA 2560
RAMPS 1.4
And Printerface
When I push the +10Y direction on interface it move toward 10mm
When I push the -10Y direction button it cause the same
by
epiteszsrac21
-
RAMPS Electronics
Sziasztok !!
Lenne egy hatalmas problémám!
Összeállt a nyomtatóm egy Mendel Pursa
Arduino MEga 2560
RAMPS 1.4
elektronikával
Szoftver: Printerface
A firmware amit futtatok az Arduinon egy Sprinter firmware. Az lenne a gondom hogy az Y tengely csak egy irányba hajlandó mozdulni akárhogyis nyomom a mínusz plusz koordinátát neki. Kipróbáltam minden lehetőséget már . kicseréltem a Pololu-t r
by
epiteszsrac21
-
Hungary RepRap User Group
Dear Rep_Rapers!
I have got a big problem! Actually I'm building a Pursa 3d printer. Every endstops are working well and everything is OK.
BUT one thing doesn't let me to calm:
-I use Printer Interface (Print_Run)
-When I send a sign to Y stepper motor negative directon it's move on.
-When I send a sign the positive direction the table is moving negative direction same.
-The endstop works
by
epiteszsrac21
-
RAMPS Electronics
Köszönöm szépen a sok segítséget Azt hiszem akkor nekilátok az információ szerzésnek .
by
epiteszsrac21
-
Hungary RepRap User Group
-Hogy érdemes ezt az egészet elkezdeni? ( A magyar fórumot már átfutottam )
-Gyüjtsön be az ember minden elérhető alkatrészt hozzá és építse meg vagy érdemes szépen fokozatosan felépíteni?
-Te esetleg tudnál nyomtatni Mendel-parts alkatrészeket mert igényt tartanék rá?
-Mi az ami így az elején buktató és érdemes rá odafigyelni? Amik így rosz irányba terelhetik a dolgot (felesleges pénkidobássa
by
epiteszsrac21
-
Hungary RepRap User Group
HEllo TONK!
Ha esetleg elérhető vagy vagy csekkolod még a fórumot akkor örülnék ha fel tudnánk venni a kapcsolatot. Most kezdenék neki egy MENDEL építésének még csak az információ gyüjtéés fázisában van a dolog viszont jól jönne a segítséged!
Itt egy e-mail cím: bazsali.gabor@gmail.com ha
by
epiteszsrac21
-
Hungary RepRap User Group