Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 3 of 3
So the 10mm cube I downloaded off the net was actually a 37mm cube..... lol
i found and attempted to print a 10mm cube.
the printer has the same fault at the same position of the 37mm cube.
to me this must rule out hardware as the fault? If it was a thermal shutdown situation it shouldn't have happened until later in the print of the 10mm cube.
im starting to think it might be slicer settings
by
zvargulis
-
Printing
Hey reprappers
I have been battling with this printer for a while now, revisiting it every couple months trying to get a bit further before getting wildly frustrated and moving on to another hobby for a while.
I have designed and built my own printer, its made from v-slot extrusion and all axis are TR8*8 lead screw. And z min is an IR probe.
I have had so many different problems from dealing w
by
zvargulis
-
Printing
QuoteGovahnator
They arrive tommorow, il keep you guys up to date.
Feel free to share your opinion/experience
Im interested in hearing your results, i also believe that having an intergrated leadscrew nema 17 will improve peformance vs nema 17 with coupler.
Can you provide a link or specification of what you bought?
cheers
josh
by
zvargulis
-
Prusa i3 and variants