Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 5 of 5
QuoteDownunder35m
Might seem wasteful but think about upgrading to a WiFi enabled SD - this way you can leave the SD in the printer and won't wear down the slots by the ongoing swapping.
That is an idea, that I will defiantly look into, thanks. But either way I have a to get a standard SD card working first don't I?
by
DavidGebbett
-
Printing
Hi guys sorry for the late reply, I have tried formatting the card, I have a variety of cards from 128mb - 8gb using NTFS, Fat16 and Fat32.
They give me the same results I mentioned above.
Anything other thoughts?
by
DavidGebbett
-
Printing
I have built a home made 3D printer but I'm having some issues with getting the SD card to initialize or mount. I can print from USB without any problem.
I am using the following;
Arduino Mega 2560
RAMPS 1.4
REPRAP Pro Discount Smart Controller (tried both normal and full graphic variants
Repetier firmware V2 (or what ever the latest version is)
Windows 7, Arduino V1.0.6 to compile, Repetier Ho
by
DavidGebbett
-
Printing
Hi MichaelBrock,
Thanks for the response, I have tried the following in configuration.h file:
Change line 46 to #define MOTHERBOARD 33
Change line 306 to #define REPRAP_DISCOUNT_SMART_CONTROLLER
Change line 326 to #define NEWPANEL
I even made the following change in the Pins.h file:
Change line 318 to #define RAMPS_V_1_3
None of the above seems to make any difference.
by
DavidGebbett
-
General
I am new to the Arduino & RAMPS scene, so please excuse any silly questions
I have an Arduino 2560 with RAMPS 1.4 board that I am trying to get working with a RepRapDiscount Smart Controller. I am using the Marlin firmware with Arduino IDE 1.0.6 to compile it. I am not getting any errors on compiling, but I can't seem to get anymore than 2 solid white lines (Lines 1 & 3) appearing all t
by
DavidGebbett
-
General