Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 3 of 3
Appreciate your assistance Obewan.
I altered the serial port to '0' in the configuration.h file and that solved the problem and I've been able to get the printer working which will enable me to fine tune the calibration..
Once connected, I had a problem with the hot end thermisor not reading. I replaced it and solved that problem. Seems that wires at the hot end were broken by the holding screw
by
DaChooksta
-
Printing
Over the past 18 months or so, I've been slowly building a Prusa i3 Rework from parts I have purchased from a number of internet sources. I have had difficulties in the past with software and programmes and have put the project aside and moved along with other projects (motorcycle restoration being one). That said, I have found time to devote to the printer and believe it is now at the stage of '
by
DaChooksta
-
Printing
Last year, I decided to construct a Mendel i3 Rework printer and rather than settle on a kit set, I decided to source all the necessary components myself.
The build has been completed but I've hit a brick wall insofar as getting the marlin files in a fit state for uploading onto my RAMPS board.The error message from my latest attempt is attached,
I've tried a number of downloaded files ex inter
by
DaChooksta
-
General Mendel Topics