Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 5 of 5
I'm printing a base for a model of a windturbine and I'm challenging with a peculiar layer shift.
It's a shift of about 20 mm and occurs only once. After the shift the printing is normal again.
My guess is that it has nothing to do with temperature, because the layer shifting should remain.
My second guess is that is also nothing mechanical, because of the same reason.
So it must be a slicing
by
martinpaul
-
Printing
I flashed my firmware again and the problem seems gone, I hope for ever.
Thanks for helping.
by
martinpaul
-
Reprappers
I ran a test with the USB cable connected to my laptop and so far no sign of the white screen.
A couple of days ago I installed 2 fans to cool my RAMPS. That seems the problem, but I don't understand. Overheating and cooling are each otherw opposite, right?
by
martinpaul
-
Reprappers
Hello, I am Martin Paulissen and have a DIY REPRAP 3D printer.
I work with Marlin 1.1.9 and Arduino 1.8.5. on a windows machine.
I have printed nice stuff with my printer but suddenly it dies during printing. The first time the display was completely white (see attached file) on later occasions it just died without any error message.
Who can help me to find out what's wrong.
Martin
by
martinpaul
-
Reprappers
I'm working on my reprap printer, but the heatend is contantly clogged. I reduced the printing temperature from 200 to 190 degrees and that helped a bit.
I tried to print Benchy and it almost succeeded. As you can in the picture the top of the chimney failed because the heatend was clogged.
On the same picture you see the piece of filament that was clogged in the heatend. The end looks like a
by
martinpaul
-
Reprappers