Show all posts by user
Printing issues ...
Page 2 of 3
Pages: 123
Results 31 — 60 of 67
Ive been trying to set the voltage on the drivers but they're nit reasing correctly. I can only get reads on the opposite side of pins.
by
theinsainepops
-
Reprappers
Here's my Config.H file:
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
// User-specified version info of this build to display in terminal window during
// startup. Implem
by
theinsainepops
-
Reprappers
Hey fourm! So I got my kossel 2020 kit in a few days back and have it all built up and ready for programming!! So far with the kit im very satisfied, the construction overall went smooth with a few tweaks. But now unfortuantley im running into my first and hopefully last problem. For some reason when I enter the g28 code in printrun to have all the motors go to the endstops, only the motor that i
by
theinsainepops
-
Reprappers
Hey fourm
I have a prusia i3 that i bought from folger tech technologies that is not 100% assebled and working. I have a coding/ issue that i cant seem to figure out. I bought this printer 3 months ago & it just cant seem to find the time to really look into it. I will have pics up soon but im asking $225 for it comes with basically everything you need besides a few screws and bolts &am
by
theinsainepops
-
For Sale
QuoteSteveRoy
Can you post the end stop settings from your Marlin's configuration.h file
Steve
Sorry for the long wait Steve I just got off work..
// corse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS
// fine Enstop settings: Individual Pullups. will be ignord if ENDSTOPPULLUPS i
by
theinsainepops
-
Printing
Quoteggherbaz
QuoteAlright so know it pronterface is saying that my endstop min is open but endstop max is triggered and the sampe problem still applies..
Unless you really have max and min endstops in the same axis. Disable the endstops that you don't have or switch them the logic.
I personally use all my switches in minimum lication so I always disable max endstops.
Alright so I moved all m
by
theinsainepops
-
Printing
So I got it all figured out!! But One more major problem, for my Z & X axis when the endstops are hit it wont let the motors turn the other way to get off the endstops. In printer face it says endstops hit. But for my Y axis when the endstop is triggered it let's me move off of it.
by
theinsainepops
-
Printing
Ok!! So I got it all figured out!! But One more major problem, for my Z & X axis when the endstops are hit it wont let the motors turn the other way to get off the endstops. In printer face it says endstops hit. But for my Y axis when the endstop is triggered it let's me move off of it.
by
theinsainepops
-
Printing
I figured out how to disable my endstops but I keep on getting one triggered and the other open. I can't seem to solve my problem. My Y axis is on the front, X on the right, and my Z on the bottom, I reconfigured my wiring. And I still cannot get this to work!
by
theinsainepops
-
Printing
How do you disable the endstops??
by
theinsainepops
-
Printing
Quoteggherbaz
Endstop logic:
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic o
by
theinsainepops
-
Printing
Quoteggherbaz
Usually that happens when you have the logic of your switches inverted in the firmware. If you have pronterface connect the printer and use the command M119 to check the status of your switches. For any switch showing triggered without been hit, switch the ligic in marlin.
If Z only goes down, you have the switch in Max instead of Min location so you will have to change that too un
by
theinsainepops
-
Printing
Hello fourm, I have a problem that i've been sitting on for quiet awhile know because I cant figure out the solution or the problem. Im getting ready to just give up because I have been trying to get this 3d printer working since mid August. I have a folgertech prusa i3, and here's my problem. For some reason my motors will only go one way, and they wont calibrate to my endstops. So it goes beyon
by
theinsainepops
-
Printing
Alright, and im trying to do this air print but everytime I out it through pronterface it doesn't do anything
by
theinsainepops
-
Printing
Quoteggherbaz
Yes I did, and I think its best for you to re order some of the damaged parts (they are of really poor quality) and will affect your printing capabilities, and get some connectors from eBay or Aliexpress and re wire your printer. It looks like you did a good solder job and covered most of the soldered connections with heat shrink tubing (assume you are changing stuff around for test
by
theinsainepops
-
Printing
Did you ever receive the email?
by
theinsainepops
-
Printing
Quoteggherbaz
The fact that you solder the cables to the board makes me wonder if something get overheated or any link broken, I'm not saying that you don't know how to solder, it's just that can happen to anyone. Having the pins so close to each other they might be touching or creating interference, did you used heat shrink tubing?
Please email me to ggherba
by
theinsainepops
-
Printing
Quoteggherbaz
Did you adjusted the trim pods on the drivers?
Did you checked that no switches shows triggered?
Which feed rates are set in marlin?
What size threaded rod are you using?
Are all the steppers wired the same way? Color by color the x and z steppers looks the same as your y one?
Can you post some pictures of your printer? Take pictures of your board too.
Do an air print, and whi
by
theinsainepops
-
Printing
This is my configuration h. file
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
// This configurtion file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
//User specified version info of this build to display in terminal window during startup.
//
by
theinsainepops
-
Printing
I had to soder all of the wires because the people I bought this kit from for some reason never send me the connections, all my wiring is correct I know that for a fact, I did work with the drovers and did exactly what you said. And still nadda, also on the x axis the plastic modled parts broke on me while putting the rods in so I had to do some homemade adjusting like you see in the pic. Also t
by
theinsainepops
-
Printing
Ok thanks! Im taking pictures right now. I really appreciate the help!
by
theinsainepops
-
Printing
Hello fourm, so I finally got my new ramps board in and drivers and completely redid my wiring, and yet im still having the same problems. My y-axis works flawlessly. Works without a problem.. my x axis moves on every other command and only travels about 4 inches then wont move anymore. My z axis moves a little but for the most part makes a loud ringing noise until I turn the printer off. Can so
by
theinsainepops
-
Printing
Please let me know if you fix and and tell me what you did. I ordered all new drivers wires and and controller board
by
theinsainepops
-
Printing
Alright thank you, ill check that as soon as I get home
by
theinsainepops
-
Printing
Ohh alright. Ill do that when I get home.
by
theinsainepops
-
Printing
Quotepushthatbolder
Have you tuned the trimpots on the stepper drivers?
You will need to tune the power input, and even more important for the 2 steppers running from 1x stepper cintroller.
Tune with an antistatic tool. CLOCKWISE until motor buzzes, then bring back until the motor has good torque and runs smooth.
Do you have the bridge connectors in place for the 1/16 stepping that your firmwar
by
theinsainepops
-
Printing
No then I have not done a m119 test.. how do I do one? And im sorry for my lack of knowledge ive done lots of research but it looks like I haven't done enough
by
theinsainepops
-
Printing
I am uploading the new settings but no I haven't saved them.. and the endstops appear to work just fine. When I press down on them a little led turns red on it.
by
theinsainepops
-
Printing
Yes I am using m5 threaded rods.. and for some reason now when I try to move the stepper motors through pronterface on the very right side it say okokok -- everytime it try to move the motors
by
theinsainepops
-
Printing
yes here it is, i copied and pasted if thats ok;
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
// This configurtion file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
//User specified version info of this build to display in terminal window dur
by
theinsainepops
-
Printing
Page 2 of 3
Pages: 123