Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 9 of 9
Hello,
I would like to suggest a new feature to correct print errors.
I've had many prints that for whatever reason the filament does not stick to the previous layer, and separates in the middle of a print.
I know there is a pause button, but this is not sufficient to get access to fix the separation issue. I would like to have a feature that clears the head out of the way so there is access
by
midnightvisions
-
Repetier
It finally worked on 250000, and 256000 baud. Never would have guessed it would work on that high a rate.
thanks
by
midnightvisions
-
Repetier
baudrate was set at default 57600, but didn't work. lowered it to 9600, stopping at eack step, still didnt work. reset it back to 57600 anyway.
hit the reset button on the mega board, still didn't work.
usb makes a good connection and sound when plugged in and removed. same when hitting mega board reset button
device manager says device is working properly. those com and baud settings matc
by
midnightvisions
-
Repetier
doesn't help
by
midnightvisions
-
Repetier
I'm having the same issue on Windows (.90c), its like the program's communication abilities just timed out?
by
midnightvisions
-
Repetier
Been pulling my hair out for the last two days.
I did not have the printer pluged in while troubleshooting the previous issues.
My computer can no longer communicate with with the printer anymore. Clicking connect, it says connected, but nothing works. All commands just keep building the the waiting que.
None of the communication settings were changed during this process, but because the reg
by
midnightvisions
-
Repetier
@panxinlong7373 Thanks,, It was a combination of a bad windows registry and having nozzle diameter smaller than the layer height.
@CrazymonkeyCM2 The item had been sliced many times before to fine tune the print. After many issues with infill, sidewalls, and top layers not filling it was recomended that I just uninstall everything and reinstall the original software which didn't have these er
by
midnightvisions
-
Repetier
I had the latest version of Repetier installed but after frequent issues I downgraded back to the original version that came with the printer .72 with slic3r 0.9.2.
The first 10 prints went mostly trouble free but now 2 seconds after hitting the slice button (to start slic3r) I get an error message that the gcode file can't be found.
appdata/local/repetierhost/composition.gcode
I coped the log
by
midnightvisions
-
Repetier
Hello,
Newby...
Using the latest version of Repetier, Slic3r 0.9.10b
1) I have the same probems with the top laters as others have posted but,,,
2) Why is the infill very rough? The outside layers are fine, but my printer (ecksbot) just makes a fluffed up mess of the infill.
The machines been leveled, and calibrated, belts tightened. Its been slowed down to reduce the speed, but those are
by
midnightvisions
-
Slic3r