This looks really interesting! Too bad you don't sell a kit for us lazy people with too many projects already I will have to dig out some piezos and do some experimenting. I like the possibility to level with heated bed and nozzle, I am currently rebuilding my kossel mini that originally had FSR bed leveling. That wasn't all that reliable and was removed while fitting a heated bed. The major prby CountZero - Tech-Talk
What kind of motors do you have?by CountZero - Tantillus
You could use repetier host. But any serial terminal should work(minicom for instance).by CountZero - General
Acceleration 250 mm/s2by CountZero - Delta Machines
Sorry, I missed your reply. I don't check in very often. The flex3drive has a 1:40 gearing. I have to double check the acceleration I don't remember what I usenow, speed 40-50 mm/s retraction length 0.5-2 mm depending on filament but has not done any real tuning. Printing PETG without stringing, with nylon I get some stringing, but I think that is mostly due to not being dry enough. Printingby CountZero - Delta Machines
I'm quite pleased with mutley3d's Flex3driveby CountZero - Delta Machines
Is your hot end cooling fan wired to be always on? I had lots of problems at first, only because I cut power to the machine after finishing a print and not letting the hot end cool down first. Your fan needs to be on until the hot end is 50C or lower.by CountZero - Printing